/live/media/VI/VI_99P00821B_Ang.jpg)
Nugeon 99P00821B Disc Brake Caliper - Rear Right
| Brand | Nugeon 99P00821B |
|---|---|
| Position | Rear Right |
| Anti-Squeal Shims Included | No |
| Bleeder Screw Cap Included | No |
| Bleeder Screw Included | Yes |
| Bleeder Screw Thread (in) | 3/8-24 |
| Bleeder Screw Thread (mm) | M10-1.0 x 28 |
| Bleeder Thread Size | M10-1.0 |
| Bracket Included | Yes |
| Bracket Mounting Bolts Included | No |
| Caliper And Pad Hardware Included | No |
| Caliper Color | Grey |
| Caliper Finish | Rust preventative |
| Caliper Slides Included | Yes |
| Casting Material | Cast iron |
| Dust Boots Included | Yes |
| Hardware Included | Yes |
| Housing Cast Numbers | Bc140046 |
| Inlet Fitting Type | Banjo bolt |
| Inlet Port Thread Size (mm) | M10-1.0 x 23.4 |
| Inlet Thread Size | M10-1.0 |
| New or Remanufactured | Remanufactured |
| Package Contents | Includes brake pad installation hardware w/ banjo bolt & copper c |
| Pads Included | No |
| Piston 1 Outside Diameter (in) | 1 |
| Piston 1 Outside Diameter (mm) | 38 |
| Piston Material | Steel |
| Piston Quantity | 1 |
| Wear Sensors Included | No |
| Product line | TechShield 360 (tm) |
| Fits | Hyundai · 6 vehicles |
Remanufactured caliper. Restored to deliver dependable braking performance.
Cast iron housing. Provides a rigid, durable foundation for the caliper.
Hardware included. Comes with brake pad installation hardware and banjo bolt.
Rear Right Brake Caliper for Hyundai Santa Fe
Nugeon TechShield 360 (tm) part number 99P00821B is a remanufactured disc brake caliper for the rear right position on select 2001-2006 Hyundai Santa Fe models. It is built with a cast iron housing, grey rust-preventative finish, and a single 38 mm steel piston for direct brake hydraulic service.
The TechShield 360 (tm) product line focuses on corrosion resistance and service-ready brake hydraulics. This caliper includes the bracket, slides, dust boots, bleeder screw, and brake pad installation hardware with banjo bolt and copper crush washers where applicable, making it a practical OE-style replacement for Hyundai Santa Fe rear brake repair.
- Fits 2001-2006 Hyundai Santa Fe, rear right
- Remanufactured disc brake caliper with bracket included
- Cast iron housing with rust preventative grey finish
- Single 38 mm steel piston for rear brake hydraulic operation
- Bleeder screw included; banjo bolt inlet fitting
- Caliper slides and dust boots included
- Part number 99P00821B for catalog and service matching
Detailed Product Overview
This Nugeon brake caliper is engineered for the rear right side of the Hyundai Santa Fe and is identified by housing cast number BC140046. It uses an M10-1.0 inlet thread and an M10-1.0 bleeder thread, with a 3/8-24 bleeder screw thread specification also listed for service reference. The steel piston and included hardware support a complete hydraulic caliper replacement for vehicles in the confirmed fitment range. Part number 99P00821B is the correct reference when searching for a remanufactured rear right Hyundai Santa Fe brake caliper.
Common Brake Issues It Can Address
- Brake fluid leakage at the caliper body or piston seal area
- Uneven rear braking caused by a sticking or seized caliper
- Corrosion on the caliper housing or slide components
- Soft or inconsistent pedal feel related to caliper hydraulic wear
- Poor pad movement from worn caliper slides or damaged dust boots
Installation Notes and Tips
Verify rear right position, inlet fitting style, and thread sizes before installation. Transfer or replace brake fluid as needed, bleed the hydraulic system after installation, and confirm proper pad movement and rotor clearance before returning the vehicle to service. For Hyundai Santa Fe brake repair, match the caliper to the confirmed 2001-2006 fitment and use the part number 99P00821B for ordering and verification.
Quality Assurance
Nugeon TechShield 360 (tm) remanufactured brake components are built for brake hydraulic service with corrosion-resistant finishing and service-specific hardware details. This caliper is supplied as a remanufactured unit for the confirmed Hyundai Santa Fe application and is identified by part number 99P00821B.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2006 | Hyundai | Santa Fe | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2005 | Hyundai | Santa Fe | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2004 | Hyundai | Santa Fe | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2003 | Hyundai | Santa Fe | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2002 | Hyundai | Santa Fe | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2001 | Hyundai | Santa Fe | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| No rows match your filter. | ||||