Nugeon 99P00929B Disc Brake Caliper - Front Left or Front Right

Nugeon TechShield 360 Disc Brake Caliper

Nugeon TechShield 360 (tm) part number 99P00929B is a remanufactured disc brake caliper built for front brake service on select Honda Civic, Honda Insight, and Acura EL applications. It includes a mounting bracket and is finished with a rust preventative coating for added corrosion resistance in everyday driving conditions.

Compatible With front right and front left brake positions depending on application, this caliper uses a single 54 mm steel piston, a cast iron housing, and a banjo bolt inlet connection. The TechShield 360 line focuses on brake hydraulics protection and service-ready fitment for common Honda and Acura platforms.

Key Features

• Remanufactured disc brake caliper from Nugeon TechShield 360 (tm)
• Part number 99P00929B for front brake applications
• Cast iron housing with grey rust preventative finish
• Single 54 mm steel piston
• Includes bleeder screw, dust boots, caliper slides, hardware, and bracket
• Banjo bolt inlet fitting with M10-1.0 inlet thread size
• Bleeder screw thread: M10-1.0 x 33

Detailed Description

This Nugeon brake caliper is built for direct replacement service on select 1996-2014 Honda Civic, 2010-2014 Honda Insight, and 1997-2000 Acura EL front brake positions. The remanufactured design uses a cast iron body with a rust preventative finish, a steel piston, and included dust boots to support reliable hydraulic operation and long-term serviceability. Part number 99P00929B is supplied with the mounting bracket for the listed applications and is configured with a banjo bolt inlet connection.

The TechShield 360 (tm) product line is positioned around brake hydraulic protection and replacement-ready fitment for import passenger vehicles. For shoppers searching for a front right Honda Civic brake caliper, front left Honda Civic caliper, or Acura EL front brake caliper, 99P00929B provides a cataloged replacement option with the listed hardware and bleeder screw configuration.

This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.

What It Is Used For

• Replacing a leaking or sticking front brake caliper
• Restoring proper brake piston movement and hydraulic pressure
• Addressing uneven pad wear caused by caliper drag
• Correcting brake pull during front brake operation
• Servicing corrosion-damaged caliper housings on Honda and Acura front brakes

Installation Notes and Tips

Verify the vehicle position before ordering: this caliper is listed for front right on 2010-2014 Honda Insight, 2006-2011 Honda Civic, and 1996-2000 Honda Civic, and for front left on 2001-2005 Honda Civic. It is also listed for front right on 1997-2000 Acura EL. Confirm the banjo bolt inlet, M10-1.0 thread size, and bracketed configuration against the original part before installation.

Brake pad installation hardware is included where applicable, but pads are not included. Bleeder screw, dust boots, and caliper slides are included; anti-squeal shims and wear sensors are not included. Use the correct brake fluid bleeding procedure after installation and inspect all sealing surfaces, copper crush washers, and hose connections before returning the vehicle to service.

Quality Assurance

Nugeon remanufactured brake components are built for replacement use in brake hydraulic service, with the TechShield 360 (tm) line focused on corrosion protection and application-specific fitment. Part number 99P00929B is specified with the listed casting, piston, and hardware configuration for the covered Honda and Acura applications.