/live/media/VI/VI_99P00941A_Ang.jpg)
Nugeon 99P00941A Disc Brake Caliper - Rear Right
| Brand | Nugeon 99P00941A |
|---|---|
| Position | Rear Right |
| Anti-Squeal Shims Included | No |
| Bleeder Screw Cap Included | No |
| Bleeder Screw Included | Yes |
| Bleeder Screw Thread (mm) | M10-1.0 x 32 |
| Bleeder Thread Size | M10-1.0 |
| Bracket Cast Numbers | 3402 |
| Bracket Included | Yes |
| Bracket Mounting Bolts Included | No |
| Caliper And Pad Hardware Included | Yes |
| Caliper Color | Grey |
| Caliper Finish | Rust preventative |
| Caliper Slides Included | Yes |
| Casting Material | Cast iron |
| Dust Boots Included | Yes |
| Hardware Included | Yes |
| Housing Cast Numbers | Ad34p, 3403, r |
| Inlet Fitting Type | Banjo bolt |
| Inlet Port Thread Size (mm) | M10-1.0 x 23.4 |
| Inlet Thread Size | M10-1.0 |
| New or Remanufactured | Remanufactured |
| Package Contents | Includes brake pad installation hardware w/ banjo bolt & copper c |
| Pads Included | No |
| Piston 1 Outside Diameter (in) | 1 |
| Piston 1 Outside Diameter (mm) | 34 |
| Piston Material | Steel |
| Piston Quantity | 1 |
| Wear Sensors Included | No |
| Product line | TechShield 360 (tm) |
| Fits | Honda · 10 vehicles |
Remanufactured caliper. A cost-conscious replacement with bracket, slides, and hardware included.
Cast iron housing. Built with a steel piston and dust boots for durable brake performance.
Rust-preventative finish. Helps protect the caliper from corrosion over time.
Rear Right Brake Caliper for Accord
This Nugeon TechShield 360 disc brake caliper is a remanufactured rear right replacement for select 1998-2002 Honda Accord models. Part number 99P00941A is built for direct brake hydraulics service and includes the mounting bracket for the listed application.
Key Features
- Fits 1998-2002 Honda Accord, rear right
- Remanufactured cast iron caliper with rust preventative finish
- Grey caliper housing with steel piston
- Includes bracket, bleeder screw, dust boots, slides, and brake pad installation hardware
- Banjo bolt inlet fitting with M10-1.0 inlet and bleeder threads
- Single 34 mm piston design for rear disc brake service
- Part number 99P00941A from Nugeon TechShield 360
Product Details
Nugeon TechShield 360 focuses on brake hydraulic components built for service replacement applications. This rear right caliper for the Honda Accord uses a cast iron body, steel piston, and rust preventative finish to support dependable brake system restoration. The included bracket and hardware details make it a practical choice when replacing a worn or sticking rear caliper on the 1998-2002 Honda Accord.
Part number 99P00941A is specified for the rear right position and matches the listed Accord fitment only. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues It Can Address
- Rear brake drag caused by a sticking caliper piston or slide
- Uneven rear brake wear from caliper binding
- Brake fluid leakage at the caliper or bleeder area
- Corrosion-related caliper performance loss
- Reduced braking response from a worn rear right caliper assembly
Installation Notes
Verify rear right placement before installation and confirm the banjo bolt inlet, M10-1.0 thread sizes, and bracket cast number match the vehicle setup. Transfer or replace brake pads as needed, bleed the brake system after installation, and inspect the brake hose, washers, and mounting surfaces for wear or damage. Fits 1998-2002 Honda Accord, rear right.
Quality Assurance
This remanufactured caliper is prepared for brake service with included bleeder screw, dust boots, slides, and pad installation hardware where applicable. The TechShield 360 product line is positioned around protected brake hydraulic replacement parts for service-focused repairs.
| Year | Make | Model | Body Type | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|---|
| 2002 | Honda | Accord | Sedan | 2.3L | L4 | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2002 | Honda | Accord | Coupe | 3.0L | V6 | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2001 | Honda | Accord | Sedan | 2.3L | L4 | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2001 | Honda | Accord | Coupe | 3.0L | V6 | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2000 | Honda | Accord | Sedan | 2.3L | L4 | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2000 | Honda | Accord | Coupe | 3.0L | V6 | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 1999 | Honda | Accord | Sedan | 2.3L | L4 | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 1999 | Honda | Accord | Coupe | 3.0L | V6 | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 1998 | Honda | Accord | Sedan | 2.3L | L4 | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 1998 | Honda | Accord | Coupe | 3.0L | V6 | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| No rows match your filter. | |||||||