/live/media/VI/VI_99P00941B_Ang.jpg)
Nugeon 99P00941B Disc Brake Caliper - Rear Left
| Brand | Nugeon 99P00941B |
|---|---|
| Position | Rear Left |
| Anti-Squeal Shims Included | No |
| Bleeder Screw Cap Included | No |
| Bleeder Screw Included | Yes |
| Bleeder Screw Thread (mm) | M10-1.0 x 32 |
| Bleeder Thread Size | M10-1.0 |
| Bracket Cast Numbers | 3402 |
| Bracket Included | Yes |
| Bracket Mounting Bolts Included | No |
| Caliper And Pad Hardware Included | Yes |
| Caliper Color | Grey |
| Caliper Finish | Rust preventative |
| Caliper Slides Included | Yes |
| Casting Material | Cast iron |
| Dust Boots Included | Yes |
| Hardware Included | Yes |
| Housing Cast Numbers | Ad34p, 3403, l |
| Inlet Fitting Type | Banjo bolt |
| Inlet Port Thread Size (mm) | M10-1.0 x 23.4 |
| Inlet Thread Size | M10-1.0 |
| New or Remanufactured | Remanufactured |
| Package Contents | Includes brake pad installation hardware w/ banjo bolt & copper c |
| Pads Included | No |
| Piston 1 Outside Diameter (in) | 1 |
| Piston 1 Outside Diameter (mm) | 34 |
| Piston Material | Steel |
| Piston Quantity | 1 |
| Wear Sensors Included | No |
| Product line | TechShield 360 (tm) |
| Fits | Honda · 10 vehicles |
Remanufactured caliper. Restored to deliver dependable braking performance.
Cast iron housing. Provides a sturdy, corrosion-resistant foundation.
Hardware included. Comes with caliper and pad installation hardware.
Rear Left Brake Caliper for Honda Accord
This Nugeon TechShield 360 disc brake caliper is built for the rear left position on 1998-2002 Honda Accord models. Part number 99P00941B is a remanufactured brake hydraulic component with a cast iron housing, grey rust-preventative finish, and included bracket for direct replacement service.
TechShield 360 is Nugeon’s product line focused on corrosion resistance and dependable brake hydraulic performance. For Honda Accord rear brake service, this caliper provides the key OE-style features needed to restore proper clamping action and pedal response.
- Fits 1998-2002 Honda Accord, rear left
- Remanufactured disc brake caliper with bracket included
- Cast iron housing with grey rust-preventative finish
- 1 in. / 34 mm steel piston for rear brake operation
- Bleeder screw included with M10-1.0 thread
- Caliper slides, dust boots, and brake pad hardware included
- Banjo bolt inlet fitting with M10-1.0 inlet thread
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Detailed Product Overview
Part number 99P00941B is a rear left disc brake caliper for the 1998-2002 Honda Accord. It is supplied as a remanufactured unit with the mounting bracket, caliper slides, dust boots, and brake pad installation hardware, making it a practical replacement for worn or sticking rear brake components. The single 34 mm steel piston and cast iron body support consistent hydraulic actuation, while the rust-preventative finish helps protect the caliper housing in everyday driving conditions.
Common Brake Issues This Caliper Can Address
- Uneven rear braking on the driver-side rear wheel
- Brake drag caused by a sticking caliper piston or slide hardware
- Brake fluid seepage at the caliper body or bleeder area
- Corrosion-related caliper seizure on older Honda Accord rear brakes
- Poor pad contact from worn or damaged caliper hardware
Installation Notes and Tips
Verify rear left fitment before ordering: this caliper is listed for 1998-2002 Honda Accord applications only. Confirm the banjo bolt inlet connection, M10-1.0 thread sizes, and bracket cast numbers during comparison with the original part. Brake pad installation hardware is included, but pads are not included. Bleeding the brake system after installation is required to remove air from the hydraulic circuit.
Quality Assurance
Nugeon TechShield 360 parts are remanufactured brake components built around OE-style fitment and corrosion-resistant finishing. Part number 99P00941B is configured for rear left Honda Accord brake service with the specified bracket and hydraulic connections.
| Year | Make | Model | Body Type | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|---|
| 2002 | Honda | Accord | Sedan | 2.3L | L4 | Rear Left | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2002 | Honda | Accord | Coupe | 3.0L | V6 | Rear Left | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2001 | Honda | Accord | Sedan | 2.3L | L4 | Rear Left | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2001 | Honda | Accord | Coupe | 3.0L | V6 | Rear Left | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2000 | Honda | Accord | Sedan | 2.3L | L4 | Rear Left | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2000 | Honda | Accord | Coupe | 3.0L | V6 | Rear Left | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 1999 | Honda | Accord | Sedan | 2.3L | L4 | Rear Left | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 1999 | Honda | Accord | Coupe | 3.0L | V6 | Rear Left | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 1998 | Honda | Accord | Sedan | 2.3L | L4 | Rear Left | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 1998 | Honda | Accord | Coupe | 3.0L | V6 | Rear Left | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| No rows match your filter. | |||||||