/live/media/VI/VI_99P00948A_Ang.jpg)
Nugeon 99P00948A Disc Brake Caliper - Rear Right
| Brand | Nugeon 99P00948A |
|---|---|
| Position | Rear Right |
| Anti-Squeal Shims Included | No |
| Bleeder Screw Cap Included | No |
| Bleeder Screw Included | Yes |
| Bleeder Screw Thread (mm) | M10-1.25 x 25 |
| Bleeder Thread Size | M10-1.25 |
| Bracket Included | Yes |
| Bracket Mounting Bolts Included | No |
| Caliper And Pad Hardware Included | No |
| Caliper Color | Grey |
| Caliper Finish | Rust preventative |
| Caliper Slides Included | Yes |
| Casting Material | Cast iron |
| Dust Boots Included | Yes |
| Hardware Included | Yes |
| Housing Cast Numbers | 108, m, 10cl15sn |
| Inlet Fitting Type | Banjo bolt |
| Inlet Port Thread Size (mm) | M10-1.0 x 23.4 |
| Inlet Thread Size | M10-1.0 |
| New or Remanufactured | Remanufactured |
| Package Contents | Includes brake pad installation hardware w/ banjo bolt & copper c |
| Pads Included | No |
| Piston 1 Outside Diameter (in) | 1 |
| Piston 1 Outside Diameter (mm) | 38 |
| Piston Material | Steel |
| Piston Quantity | 1 |
| Wear Sensors Included | No |
| Product line | TechShield 360 (tm) |
| Fits | Honda · 2 vehicles |
Remanufactured unit. Restored to deliver dependable brake performance.
Cast iron housing. Provides durable strength for demanding braking.
Hardware included. Comes with brake pad installation hardware and banjo bolt.
Rear Right Brake Caliper for Honda CR-V
This Nugeon TechShield 360 disc brake caliper is a remanufactured rear right replacement for 2005-2006 Honda CR-V models. Part number 99P00948A is built for direct brake hydraulic service with the correct bracket, bleeder screw, slides, dust boots, and rust-preventative finish.
Key Features
- Fits 2005-2006 Honda CR-V, rear right
- Remanufactured cast iron disc brake caliper
- Grey caliper with rust-preventative finish
- Includes bracket and caliper slides
- Bleeder screw included with M10-1.25 thread
- Steel piston with 38 mm outside diameter
- Banjo bolt inlet fitting with M10-1.0 inlet thread
- Dust boots and hardware included
Product Details
Nugeon TechShield 360 99P00948A is a rear right disc brake caliper for the Honda CR-V, engineered as a remanufactured hydraulic replacement for the 2005 and 2006 model years. The cast iron housing, steel piston, and rust-preventative finish support dependable brake service, while the included bracket and slides help match the original mounting setup. TechShield 360 is Nugeon’s product line for brake components built around corrosion resistance and service-ready replacement fitment.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues Addressed
- Rear brake drag caused by a sticking caliper piston or slide
- Brake fluid seepage at the caliper or bleeder area
- Uneven rear braking on the Honda CR-V
- Corrosion-related caliper seizure on the rear right corner
- Brake pedal response problems tied to a worn hydraulic caliper
Installation Notes
Verify rear right position, inlet thread size, and banjo bolt connection before installation. Transfer or replace brake pads as needed, and inspect the brake hose, copper crush washers, and mounting surfaces for wear or corrosion. Bleed the brake system after installation to remove air from the hydraulic circuit.
Quality Assurance
Remanufactured to replace the original rear right caliper on 2005-2006 Honda CR-V applications, part number 99P00948A is finished with rust prevention and supplied with the listed service components for brake repair.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2006 | Honda | CR-V | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2005 | Honda | CR-V | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| No rows match your filter. | ||||