/live/media/VI/VI_99P00950B_Ang.jpg)
Nugeon 99P00950B Disc Brake Caliper - Rear Left
| Brand | Nugeon 99P00950B |
|---|---|
| Position | Rear Left |
| Anti-Squeal Shims Included | No |
| Bleeder Screw Cap Included | No |
| Bleeder Screw Included | Yes |
| Bleeder Screw Thread (mm) | M10-1.25 x 25 |
| Bleeder Thread Size | M10-1.25 |
| Bracket Cast Numbers | 199 |
| Bracket Included | Yes |
| Bracket Mounting Bolts Included | No |
| Caliper And Pad Hardware Included | No |
| Caliper Color | Grey |
| Caliper Finish | Rust preventative |
| Caliper Slides Included | Yes |
| Casting Material | Cast iron |
| Dust Boots Included | Yes |
| Hardware Included | Yes |
| Housing Cast Numbers | 11cl, 16/17 |
| Inlet Fitting Type | Banjo bolt |
| Inlet Port Thread Size (mm) | M10-1.0 x 23.4 |
| Inlet Thread Size | M10-1.0 |
| New or Remanufactured | Remanufactured |
| Package Contents | Includes brake pad installation hardware w/ banjo bolt & copper c |
| Pads Included | No |
| Piston 1 Outside Diameter (in) | 2 |
| Piston 1 Outside Diameter (mm) | 40 |
| Piston Material | Steel |
| Piston Quantity | 1 |
| Wear Sensors Included | No |
| Product line | TechShield 360 (tm) |
| Fits | Honda · 6 vehicles |
Remanufactured unit. Restored to deliver dependable brake performance with a fresh service life.
Cast iron housing. Provides a rigid foundation for consistent braking and long-term durability.
Hardware included. Comes with brake pad installation hardware, a banjo bolt, and copper crush washers where applicable.
Rear Left Brake Caliper for Honda Odyssey
This Nugeon TechShield 360 disc brake caliper is a remanufactured rear left replacement for select 2005-2010 Honda Odyssey models. Built with a cast iron housing, steel piston, and rust preventative finish, it is configured for direct brake hydraulic service on the rear left side.
Compatible with 2005-2010 Honda Odyssey rear left applications, Part Number 99P00950B is supplied with the mounting bracket and includes the bleeder screw, dust boots, caliper slides, and brake pad installation hardware where applicable. The TechShield 360 line focuses on corrosion resistance and service-ready caliper components for brake repair work.
- Fits 2005-2010 Honda Odyssey, rear left
- Remanufactured disc brake caliper with bracket included
- Cast iron housing with grey rust preventative finish
- Steel piston with dust boots and caliper slides included
- Banjo bolt inlet fitting with M10-1.0 inlet thread
- Bleeder screw included with M10-1.25 thread
- Part Number 99P00950B for brake hydraulic replacement
Product Details
Part Number 99P00950B is a rear left disc brake caliper for the 2005-2010 Honda Odyssey. It uses a single 40 mm steel piston and a banjo bolt inlet fitting, with the bracket cast number 199 and housing cast numbers 11CL and 16/17. The TechShield 360 product line is built around corrosion-resistant finishing and service-focused caliper hardware for brake system restoration.
Common Brake Issues This Caliper Can Address
- Leaking or sticking rear left caliper
- Uneven rear brake pad wear
- Reduced braking response from a worn hydraulic caliper
- Corrosion on the caliper body or piston area
- Bleeder screw service issues during brake repair
Installation Notes
Verify rear left fitment before installation on 2005-2010 Honda Odyssey vehicles. Transfer or replace brake pads as needed, and confirm the banjo bolt connection, inlet thread size, and bleeder screw thread match the vehicle brake line and service setup. Brake pad hardware is included where applicable, but pads are not included.
Quality Assurance
This Nugeon remanufactured caliper is finished with rust preventative coating and assembled with key service components for brake hydraulic replacement. Part Number 99P00950B is built for the specified rear left Honda Odyssey application and supports a direct-fit brake repair process.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2010 | Honda | Odyssey | Rear Left | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2009 | Honda | Odyssey | Rear Left | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2008 | Honda | Odyssey | Rear Left | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2007 | Honda | Odyssey | Rear Left | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2006 | Honda | Odyssey | Rear Left | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2005 | Honda | Odyssey | Rear Left | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| No rows match your filter. | ||||