/live/media/VI/VI_99P01162B_Ang.jpg)
Nugeon 99P01162B Disc Brake Caliper - Front Right
| Brand | Nugeon 99P01162B |
|---|---|
| Position | Front Right |
| Anti-Squeal Shims Included | No |
| Bleeder Screw Cap Included | No |
| Bleeder Screw Included | Yes |
| Bleeder Screw Thread (mm) | M8-1.0 x 29.8 |
| Bleeder Thread Size | M8-1.0 |
| Bracket Included | Yes |
| Bracket Mounting Bolts Included | No |
| Caliper And Pad Hardware Included | No |
| Caliper Color | Grey |
| Caliper Finish | Rust preventative |
| Caliper Slides Included | Yes |
| Casting Material | Cast iron |
| Dust Boots Included | Yes |
| Hardware Included | Yes |
| Housing Cast Numbers | Gj6e |
| Inlet Fitting Type | Banjo bolt |
| Inlet Port Thread Size (mm) | M10-1.0 x 23.4 |
| Inlet Thread Size | M10-1.0 |
| New or Remanufactured | Remanufactured |
| Package Contents | Includes brake pad installation hardware w/ banjo bolt & copper c |
| Pads Included | No |
| Piston 1 Outside Diameter (in) | 2 |
| Piston 1 Outside Diameter (mm) | 57 |
| Piston Material | Steel |
| Piston Quantity | 1 |
| Wear Sensors Included | No |
| Product line | TechShield 360 (tm) |
| Fits | Mazda · 3 vehicles |
Remanufactured unit. Restored to deliver dependable brake performance with a fresh service life.
Cast iron housing. Provides a rigid foundation for consistent braking and durability.
Hardware included. Comes with brake pad installation hardware, a banjo bolt, and copper crush washers where applicable.
Front Right Brake Caliper for Mazda 6
This Nugeon TechShield 360 disc brake caliper is a remanufactured front right replacement for 2003-2005 Mazda 6 applications. Part number 99P01162B is built with a cast iron housing, grey rust-preventative finish, and a 57 mm steel piston for direct brake hydraulic service.
Key Features
- Fits 2003-2005 Mazda 6, front right
- Remanufactured disc brake caliper with bracket included
- TechShield 360 product line for corrosion-focused brake service
- Cast iron housing with grey rust-preventative finish
- 57 mm steel piston and dust boots included
- Bleeder screw included; banjo bolt inlet fitting
- Caliper slides included for bracketed front brake service
- Part number 99P01162B
Detailed Description
Nugeon 99P01162B is a remanufactured front right disc brake caliper for the Mazda 6, covering 2003, 2004, and 2005 model years. It uses a single 57 mm steel piston, a cast iron body, and a rust-preventative grey finish to support brake system restoration where the original caliper has seized, leaked, or worn unevenly. The TechShield 360 line focuses on corrosion resistance in brake hydraulics, and this unit includes the bracket, bleeder screw, dust boots, and caliper slides for the specified application.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Reasons for Replacement
- Brake fluid leakage at the caliper body or piston seal
- Uneven pad wear on the front right side
- Sticking or seized caliper piston movement
- Corrosion on the caliper housing or slide points
- Soft, inconsistent, or reduced braking response from hydraulic wear
Installation Notes and Tips
Verify the front right position and confirm the banjo bolt inlet and M10-1.0 inlet thread before installation. This caliper is supplied with a bracket and caliper slides, but pad hardware, pads, and wear sensors are not included. Bleed the brake system after installation and inspect the hose, banjo connection, and mating hardware for proper sealing on the Mazda 6.
Quality Assurance
Nugeon TechShield 360 brake components are remanufactured for brake hydraulic service and finished with rust-preventative protection to support long-term corrosion resistance in the brake system.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2005 | Mazda | 6 | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2004 | Mazda | 6 | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2003 | Mazda | 6 | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| No rows match your filter. | ||||