/live/media/VI/VI_99P01562B_Ang.jpg)
Nugeon 99P01562B Disc Brake Caliper - Front Right
| Brand | Nugeon 99P01562B |
|---|---|
| Position | Front Right |
| Anti-Squeal Shims Included | No |
| Bleeder Screw Cap Included | No |
| Bleeder Screw Included | Yes |
| Bleeder Screw Thread (mm) | M7-1.0 x 32 |
| Bleeder Thread Size | M7-1.0 |
| Bracket Included | Yes |
| Bracket Mounting Bolts Included | No |
| Caliper And Pad Hardware Included | No |
| Caliper Color | Grey |
| Caliper Finish | Rust preventative |
| Caliper Slides Included | Yes |
| Casting Material | Cast iron |
| Dust Boots Included | Yes |
| Hardware Included | Yes |
| Housing Cast Numbers | 57-28, 1, r, hose, k, 57-28 |
| Inlet Fitting Type | Banjo bolt |
| Inlet Port Thread Size (mm) | M10-1.0 x 23.4 |
| Inlet Thread Size | M10-1.0 |
| New or Remanufactured | Remanufactured |
| Package Contents | Includes brake pad installation hardware w/ banjo bolt & copper c |
| Pads Included | No |
| Piston 1 Outside Diameter (in) | 2 |
| Piston 1 Outside Diameter (mm) | 57 |
| Piston Material | Steel |
| Piston Quantity | 1 |
| Wear Sensors Included | No |
| Product line | TechShield 360 (tm) |
| Fits | Toyota · 9 vehicles |
Remanufactured unit. Restored to deliver dependable brake performance with a fresh service life.
Cast iron housing. Provides a rigid foundation with rust-preventative finish for added durability.
Hardware included. Comes with brake pad installation hardware, banjo bolt, and copper crush washers where applicable.
Front Right Brake Caliper for Toyota Camry
Nugeon 99P01562B is a remanufactured front right disc brake caliper for select Toyota Camry applications. It is built with a cast iron housing, grey rust-preventative finish, and a 57 mm steel piston to support consistent hydraulic braking performance.
TechShield 360 (tm) is Nugeon’s product line focused on corrosion resistance and brake-system durability. For this application, the caliper is supplied with a mounting bracket and includes a bleeder screw, dust boots, caliper slides, and hardware where applicable.
- Fits 1992-1999 Toyota Camry, front right
- Fits 2000 Toyota Camry, front right, supplied with mounting bracket and 255 mm disc
- Remanufactured disc brake caliper with cast iron housing
- Grey rust-preventative finish for added corrosion resistance
- 57 mm steel piston with banjo bolt inlet fitting
- Includes bleeder screw, dust boots, caliper slides, and bracket
- Nugeon part number 99P01562B for front right brake service
This front right Toyota Camry brake caliper is used to restore hydraulic pressure at the wheel and support even pad contact against the rotor. It is a direct service replacement for Camry brake repairs where the original caliper is sticking, leaking, seized, or no longer maintaining proper braking response. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues It Can Address
- Brake fluid leakage at the caliper body or bleeder area
- Uneven braking caused by a sticking or seized piston
- Poor pad movement from worn or corroded caliper components
- Brake drag from damaged slides or internal corrosion
- Reduced stopping performance on the front right corner
Installation Notes and Tips
Verify rotor size and bracket style before installation. This caliper uses an M10-1.0 banjo bolt inlet and an M7-1.0 bleeder screw thread. Inspect brake hoses, pads, and rotor condition during service, and bleed the hydraulic system after installation to remove air from the line.
Quality Assurance
Nugeon remanufactured brake components are processed for brake-system service with corrosion-resistant finishing and application-specific hardware details for the listed Toyota Camry fitments. Part number 99P01562B is built for front right use on the confirmed applications shown above.
| Year | Make | Model | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|
| 2000 | Toyota | Camry | 2.2L | L4 | Front Right | Supplied w/ Mounting Bracket; w/ 255mm Disc; TechShield 360 (tm) |
| 1999 | Toyota | Camry | 2.2L | L4 | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 1998 | Toyota | Camry | 2.2L | L4 | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 1997 | Toyota | Camry | 2.2L | L4 | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 1996 | Toyota | Camry | 2.2L | L4 | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 1995 | Toyota | Camry | 2.2L | L4 | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 1994 | Toyota | Camry | 2.2L | L4 | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 1993 | Toyota | Camry | 2.2L | L4 | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 1992 | Toyota | Camry | 2.2L | L4 | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| No rows match your filter. | ||||||