/live/media/VI/VI_99P01624B_Ang.jpg)
Nugeon 99P01624B Disc Brake Caliper - Front Right
| Brand | Nugeon 99P01624B |
|---|---|
| Position | Front Right |
| Anti-Squeal Shims Included | No |
| Bleeder Screw Cap Included | No |
| Bleeder Screw Included | Yes |
| Bleeder Screw Thread (mm) | M7-1.0 x 32 |
| Bleeder Thread Size | M7-1.0 |
| Bracket Cast Numbers | 5413 |
| Bracket Included | Yes |
| Bracket Mounting Bolts Included | No |
| Caliper And Pad Hardware Included | No |
| Caliper Color | Grey |
| Caliper Finish | Rust preventative |
| Caliper Slides Included | Yes |
| Casting Material | Cast iron |
| Dust Boots Included | Yes |
| Hardware Included | Yes |
| Housing Cast Numbers | 5413, r |
| Inlet Fitting Type | Banjo bolt |
| Inlet Port Thread Size (mm) | M10-1.0 x 27.32 |
| Inlet Thread Size | M10-1.0 |
| New or Remanufactured | Remanufactured |
| Package Contents | Includes brake pad installation hardware w/ banjo bolt & copper c |
| Pads Included | No |
| Piston 1 Outside Diameter (in) | 2 |
| Piston 1 Outside Diameter (mm) | 54 |
| Piston Material | Steel |
| Piston Quantity | 1 |
| Wear Sensors Included | No |
| Product line | TechShield 360 (tm) |
| Fits | Chevrolet and Toyota · 10 vehicles |
Remanufactured caliper. Restored for dependable brake hydraulic performance.
Cast iron housing. Provides a rigid foundation with rust-preventative finish.
Hardware included. Comes with brake pad installation hardware, banjo bolt, and copper crush washers where applicable.
Front Right Disc Brake Caliper for Corolla and Prizm
This Nugeon TechShield 360 disc brake caliper is a remanufactured front right replacement for select 1998-2002 Chevrolet Prizm and Toyota Corolla models. Part number 99P01624B is built with a cast iron housing, grey rust-preventative finish, and included bracket for a direct-fit brake hydraulics repair.
Key Features
- Fits 1998-2002 Chevrolet Prizm, front right
- Fits 1998-2002 Toyota Corolla, front right
- Remanufactured disc brake caliper with bracket included
- Cast iron housing with grey rust-preventative finish
- Steel piston with 54 mm outside diameter
- Bleeder screw included; banjo bolt inlet fitting
- Caliper slides, dust boots, and hardware included
- Part number 99P01624B
Product Details
Nugeon TechShield 360 focuses on brake hydraulic components prepared for everyday service replacement. This caliper uses a single steel piston, includes the mounting bracket, and is configured for the front right position on the Toyota Corolla and Chevrolet Prizm applications listed above. The housing cast numbers 5413 and R, along with the M10-1.0 inlet thread and M7-1.0 bleeder thread, help confirm the correct brake caliper match during service. Part number 99P01624B is a practical OE-style replacement for front brake repair on these compact sedans.
Common Problems This Caliper Can Address
- Sticking or seized front brake caliper movement
- Brake pull caused by uneven hydraulic operation
- Leaking caliper housing, bleeder, or inlet connection
- Corrosion on the original caliper body or bracket
- Uneven pad contact from worn piston or slide components
Installation Notes and Tips
Verify front right placement before installation and confirm the banjo bolt inlet, M10-1.0 inlet thread, and M7-1.0 bleeder thread match the vehicle’s brake line and service parts. Transfer or replace pads as needed, then bleed the brake system thoroughly after installation. Check rotor condition, pad wear, and slide movement before returning the vehicle to service. Part number 99P01624B is listed for 1998-2002 Toyota Corolla and 1998-2002 Chevrolet Prizm front right applications only.
Quality Assurance
This remanufactured Nugeon caliper is finished with rust preventative coating and supplied with key service components for brake system restoration. TechShield 360 is Nugeon’s product line for brake parts prepared for replacement service, with attention to corrosion resistance and fitment-specific application coverage.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2002 | Chevrolet | Prizm | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2002 | Toyota | Corolla | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2001 | Chevrolet | Prizm | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2001 | Toyota | Corolla | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2000 | Chevrolet | Prizm | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2000 | Toyota | Corolla | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 1999 | Chevrolet | Prizm | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 1999 | Toyota | Corolla | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 1998 | Chevrolet | Prizm | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 1998 | Toyota | Corolla | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| No rows match your filter. | ||||