/live/media/VI/VI_99P01626A_Ang.jpg)
Nugeon 99P01626A Disc Brake Caliper - Front Left
| Brand | Nugeon 99P01626A |
|---|---|
| Position | Front Left |
| Anti-Squeal Shims Included | No |
| Bleeder Screw Cap Included | No |
| Bleeder Screw Included | Yes |
| Bleeder Screw Thread (mm) | M7-1.0 x 32 |
| Bleeder Thread Size | M7-1.0 |
| Bracket Cast Numbers | 6404 |
| Bracket Included | Yes |
| Bracket Mounting Bolts Included | No |
| Caliper And Pad Hardware Included | Yes |
| Caliper Color | Grey |
| Caliper Finish | Rust preventative |
| Caliper Slides Included | Yes |
| Casting Material | Cast iron |
| Dust Boots Included | Yes |
| Hardware Included | Yes |
| Housing Cast Numbers | 6404, l |
| Inlet Fitting Type | Banjo bolt |
| Inlet Port Thread Size (mm) | M10-1.0 x 27.32 |
| Inlet Thread Size | M10-1.0 |
| New or Remanufactured | Remanufactured |
| Package Contents | Includes brake pad installation hardware w/ banjo bolt & copper c |
| Pads Included | No |
| Piston 1 Outside Diameter (in) | 2 |
| Piston 1 Outside Diameter (mm) | 63 |
| Piston Material | Steel |
| Piston Quantity | 1 |
| Wear Sensors Included | No |
| Product line | TechShield 360 (tm) |
| Fits | Toyota · 13 vehicles |
Remanufactured caliper. Restored to deliver dependable brake hydraulic performance.
Cast iron construction. Provides a sturdy housing for consistent braking response.
Hardware included. Comes with caliper and pad hardware for easier service.
Front Left Brake Caliper for Toyota Highlander
Nugeon 99P01626A is a remanufactured front left disc brake caliper for 2001-2007 Toyota Highlander applications. It is built with a cast iron housing, steel piston, and rust preventative finish for direct brake hydraulic service on the specified vehicle fitment.
The TechShield 360 line focuses on brake caliper protection and service-ready components. For this application, the caliper includes a mounting bracket, bleeder screw, caliper slides, dust boots, and brake pad installation hardware where applicable, helping support a complete front-left brake repair on the Toyota Highlander.
Key Features
- Fits 2001-2007 Toyota Highlander, front left
- Remanufactured disc brake caliper with bracket included
- Cast iron housing with grey rust preventative finish
- Steel piston with 63 mm outside diameter
- Bleeder screw included with M7-1.0 thread
- Banjo bolt inlet fitting with M10-1.0 inlet thread
- Caliper slides, dust boots, and hardware included
- TechShield 360 product line for brake hydraulic service
Detailed Description
Nugeon 99P01626A is a front left brake caliper for the Toyota Highlander, covering 2001-2007 model years. It is a remanufactured unit with a cast iron body, steel piston, and a grey rust preventative coating to support dependable brake system replacement on the front axle. The included bracket and caliper hardware simplify service on the specified Highlander application, while the banjo bolt inlet and M10-1.0 port thread match the listed hydraulic connection.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application. The part number 99P01626A is also useful when verifying the correct front left Toyota Highlander brake caliper before ordering.
What It Helps Fix
- Brake drag caused by a sticking caliper piston
- Uneven front brake pad wear on the left side
- Brake fluid seepage at the caliper or bleeder area
- Noisy or rough caliper slide movement
- Reduced braking performance from a worn hydraulic caliper
Installation Notes and Tips
Confirm the vehicle is a 2001-2007 Toyota Highlander with front left caliper fitment before installation. Match the banjo bolt inlet, M10-1.0 inlet thread, and M7-1.0 bleeder thread to the existing brake line and service hardware. Inspect pads, rotors, and brake hoses during replacement, and bleed the brake system after installation to remove air from the hydraulic circuit.
Quality Assurance
Nugeon TechShield 360 brake components are remanufactured for brake hydraulic replacement service and built around the listed OE-style fitment and hardware configuration for the Toyota Highlander application.
| Year | Make | Model | Submodel | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|---|
| 2007 | Toyota | Highlander | Base | 3.3L | V6 | Front Left | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2007 | Toyota | Highlander | Limited | 3.3L | V6 | Front Left | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2007 | Toyota | Highlander | Sport | 3.3L | V6 | Front Left | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2007 | Toyota | Highlander | Base | 2.4L | L4 | Front Left | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2006 | Toyota | Highlander | Base | 3.3L | V6 | Front Left | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2006 | Toyota | Highlander | Limited | 3.3L | V6 | Front Left | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2006 | Toyota | Highlander | Sport | 3.3L | V6 | Front Left | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2006 | Toyota | Highlander | Base | 2.4L | L4 | Front Left | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2005 | Toyota | Highlander | — | — | — | Front Left | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2004 | Toyota | Highlander | — | — | — | Front Left | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2003 | Toyota | Highlander | — | — | — | Front Left | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2002 | Toyota | Highlander | — | — | — | Front Left | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2001 | Toyota | Highlander | — | — | — | Front Left | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| No rows match your filter. | |||||||