/live/media/VI/VI_99P01626B_Ang.jpg)
Nugeon 99P01626B Disc Brake Caliper - Front Right
| Brand | Nugeon 99P01626B |
|---|---|
| Position | Front Right |
| Anti-Squeal Shims Included | No |
| Bleeder Screw Cap Included | No |
| Bleeder Screw Included | Yes |
| Bleeder Screw Thread (mm) | M7-1.0 x 32 |
| Bleeder Thread Size | M7-1.0 |
| Bracket Cast Numbers | 6404 |
| Bracket Included | Yes |
| Bracket Mounting Bolts Included | No |
| Caliper And Pad Hardware Included | Yes |
| Caliper Color | Grey |
| Caliper Finish | Rust preventative |
| Caliper Slides Included | Yes |
| Casting Material | Cast iron |
| Dust Boots Included | Yes |
| Hardware Included | Yes |
| Housing Cast Numbers | 6404, r |
| Inlet Fitting Type | Banjo bolt |
| Inlet Port Thread Size (mm) | M10-1.0 x 27.32 |
| Inlet Thread Size | M10-1.0 |
| New or Remanufactured | Remanufactured |
| Package Contents | Includes brake pad installation hardware w/ banjo bolt & copper c |
| Pads Included | No |
| Piston 1 Outside Diameter (in) | 2 |
| Piston 1 Outside Diameter (mm) | 63 |
| Piston Material | Steel |
| Piston Quantity | 1 |
| Wear Sensors Included | No |
| Product line | TechShield 360 (tm) |
| Fits | Toyota · 13 vehicles |
Remanufactured caliper. Restored for dependable braking performance with a fresh rust-preventative finish.
Cast iron housing. Delivers sturdy construction with a steel piston and included dust boots.
Hardware included. Comes with caliper and pad hardware plus a bleeder screw for easier service.
Front Right Disc Brake Caliper for Toyota Highlander
This Nugeon TechShield 360 disc brake caliper is a remanufactured front right replacement for 2001-2007 Toyota Highlander models. Built for brake hydraulic service, Part Number 99P01626B includes the bracket and hardware details needed for a direct-fit style repair on the front right corner.
Key Features
- Fits 2001-2007 Toyota Highlander, front right
- Remanufactured cast iron caliper with rust preventative finish
- Grey caliper housing with dust boots included
- Bracket included for the specified application
- Bleeder screw included with M7-1.0 thread
- Banjo bolt inlet fitting with M10-1.0 inlet thread
- Steel piston with 63 mm outside diameter
- Caliper slides and brake pad installation hardware included
TechShield 360 Product Line
Nugeon TechShield 360 focuses on brake hydraulic replacement parts with corrosion-resistant finishing and application-specific hardware details. For this Toyota Highlander front right caliper, the line emphasizes a remanufactured housing, protective finish, and included service components that support a cleaner brake repair.
Detailed Description
Part Number 99P01626B is a remanufactured disc brake caliper for the front right position on 2001-2007 Toyota Highlander vehicles. It uses a cast iron body, steel piston, and a rust preventative finish to replace a worn or sticking caliper in the brake hydraulic system. The assembly includes the bracket, caliper slides, dust boots, bleeder screw, and brake pad installation hardware, and it uses a banjo bolt inlet connection with M10-1.0 thread sizing.
This Toyota Highlander brake caliper is a direct service part for front right brake repairs where the original caliper housing, piston, or slide components have worn, seized, or begun leaking. The TechShield 360 designation identifies the product line used for this remanufactured brake hydraulic component.
Common Repair Uses
- Corrects uneven front brake pad wear on a Toyota Highlander
- Replaces a leaking or seized front right caliper
- Restores brake pedal response affected by caliper hydraulic issues
- Addresses dragging brakes caused by worn slide or piston components
- Supports brake service when the original bracketed caliper assembly is damaged
Installation Notes
Verify front right fitment on 2001-2007 Toyota Highlander applications before installation. Confirm the banjo bolt inlet connection, M10-1.0 inlet thread, and M7-1.0 bleeder thread match the vehicle’s brake line and service setup. Inspect pads, rotors, and brake hoses during installation, and bleed the brake system after caliper replacement.
Quality Assurance
Nugeon remanufactured brake components are processed for brake hydraulic replacement service with application-specific fitment details and corrosion-resistant finishing. Part Number 99P01626B is built for the listed Toyota Highlander front right application and includes the specified caliper hardware and service features.
| Year | Make | Model | Submodel | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|---|
| 2007 | Toyota | Highlander | Base | 3.3L | V6 | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2007 | Toyota | Highlander | Limited | 3.3L | V6 | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2007 | Toyota | Highlander | Sport | 3.3L | V6 | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2007 | Toyota | Highlander | Base | 2.4L | L4 | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2006 | Toyota | Highlander | Base | 3.3L | V6 | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2006 | Toyota | Highlander | Limited | 3.3L | V6 | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2006 | Toyota | Highlander | Sport | 3.3L | V6 | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2006 | Toyota | Highlander | Base | 2.4L | L4 | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2005 | Toyota | Highlander | — | — | — | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2004 | Toyota | Highlander | — | — | — | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2003 | Toyota | Highlander | — | — | — | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2002 | Toyota | Highlander | — | — | — | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2001 | Toyota | Highlander | — | — | — | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| No rows match your filter. | |||||||