/live/media/VI/VI_99P01641B_Ang.jpg)
Nugeon 99P01641B Disc Brake Caliper - Front Right
| Brand | Nugeon 99P01641B |
|---|---|
| Position | Front Right |
| Anti-Squeal Shims Included | No |
| Bleeder Screw Cap Included | No |
| Bleeder Screw Included | Yes |
| Bleeder Screw Thread (mm) | M7-1.0 x 32 |
| Bleeder Thread Size | M7-1.0 |
| Bracket Included | Yes |
| Bracket Mounting Bolts Included | No |
| Caliper And Pad Hardware Included | Yes |
| Caliper Color | Grey |
| Caliper Finish | Rust preventative |
| Caliper Slides Included | Yes |
| Casting Material | Cast iron |
| Dust Boots Included | Yes |
| Hardware Included | Yes |
| Housing Cast Numbers | 63-28, r |
| Inlet Fitting Type | Banjo bolt |
| Inlet Port Thread Size (mm) | M10-1.0 x 27.32 |
| Inlet Thread Size | M10-1.0 |
| New or Remanufactured | Remanufactured |
| Package Contents | Includes brake pad installation hardware w/ banjo bolt & copper c |
| Pads Included | No |
| Piston 1 Outside Diameter (in) | 3 |
| Piston 1 Outside Diameter (mm) | 64 |
| Piston Material | Steel |
| Piston Quantity | 1 |
| Wear Sensors Included | No |
| Product line | TechShield 360 (tm) |
| Fits | Toyota · 10 vehicles |
Remanufactured caliper. Restored to deliver dependable braking performance.
Rust-preventative finish. Helps resist corrosion for longer-lasting appearance.
Hardware included. Comes with bracket, slides, dust boots, and pad hardware.
Front Right Brake Caliper for Toyota Camry
This Nugeon TechShield 360 disc brake caliper is a remanufactured front right replacement for 2002-2006 Toyota Camry models. Part number 99P01641B is built for direct hydraulic brake service with the correct bracket, bleeder screw, slides, dust boots, and pad hardware where applicable.
TechShield 360 is Nugeon’s product line focused on corrosion resistance and service-ready brake hydraulics. For a Toyota Camry front right brake caliper replacement, it provides the key fitment and hardware details buyers look for when matching the original brake assembly.
- Fits 2002-2006 Toyota Camry, front right
- Remanufactured cast iron caliper with rust preventative finish
- Grey caliper housing with steel piston
- Bracket included for the specified application
- Bleeder screw included with M7-1.0 thread
- Banjo bolt inlet fitting with M10-1.0 inlet thread
- Caliper slides, dust boots, and pad hardware included
- Single-piston design with 64 mm piston diameter
This front right brake caliper for Toyota Camry applications is intended to restore hydraulic clamping force at the wheel and replace a worn, sticking, leaking, or seized caliper assembly. Part number 99P01641B is a direct-fit brake hydraulics component for the listed vehicle range and position.
Common Brake Issues It Can Address
- Brake fluid leakage at the caliper body or bleeder area
- Uneven pad wear caused by a sticking piston or slide hardware
- Pulling during braking from a weak or seized front right caliper
- Reduced braking response from internal caliper wear or corrosion
- Noisy or rough caliper operation from damaged dust boots or slides
Installation Notes and Tips
Verify the vehicle is a 2002-2006 Toyota Camry with front right caliper fitment before installation. Confirm the banjo bolt connection, M10-1.0 inlet thread, and M7-1.0 bleeder thread match the original brake line and service hardware. Inspect the rotor, pads, and brake hose condition during replacement, and bleed the hydraulic system after installation.
Part number 99P01641B cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Quality Assurance
Nugeon TechShield 360 brake components are remanufactured for brake service applications and built with corrosion-resistant finishing, included service hardware, and application-specific fitment details for the listed Toyota Camry front right position.
| Year | Make | Model | Submodel | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|---|
| 2006 | Toyota | Camry | — | 2.4L | L4 | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2006 | Toyota | Camry | LE | 3.0L | V6 | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2005 | Toyota | Camry | — | 2.4L | L4 | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2005 | Toyota | Camry | LE | 3.0L | V6 | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2004 | Toyota | Camry | — | 2.4L | L4 | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2004 | Toyota | Camry | LE | 3.0L | V6 | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2003 | Toyota | Camry | — | 2.4L | L4 | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2003 | Toyota | Camry | LE | 3.0L | V6 | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2002 | Toyota | Camry | — | 2.4L | L4 | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2002 | Toyota | Camry | LE | 3.0L | V6 | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| No rows match your filter. | |||||||