/live/media/VI/VI_99P01662A_Ang.jpg)
Nugeon 99P01662A Disc Brake Caliper - Rear Right
| Brand | Nugeon 99P01662A |
|---|---|
| Position | Rear Right |
| Anti-Squeal Shims Included | No |
| Bleeder Screw Cap Included | No |
| Bleeder Screw Included | Yes |
| Bleeder Screw Thread (mm) | M10-1.0 x 33 |
| Bleeder Thread Size | M10-1.0 |
| Bracket Included | Yes |
| Bracket Mounting Bolts Included | No |
| Caliper And Pad Hardware Included | Yes |
| Caliper Color | Grey |
| Caliper Finish | Rust preventative |
| Caliper Slides Included | Yes |
| Casting Material | Cast iron |
| Dust Boots Included | Yes |
| Hardware Included | Yes |
| Housing Cast Numbers | F13, r |
| Inlet Fitting Type | Banjo bolt |
| Inlet Port Thread Size (mm) | M10-1.0 x 23.4 |
| Inlet Thread Size | M10-1.0 |
| New or Remanufactured | Remanufactured |
| Package Contents | Includes brake pad installation hardware w/ banjo bolt & copper c |
| Pads Included | No |
| Piston 1 Outside Diameter (in) | 2 |
| Piston 1 Outside Diameter (mm) | 45 |
| Piston Material | Steel |
| Piston Quantity | 1 |
| Wear Sensors Included | No |
| Product line | TechShield 360 (tm) |
| Fits | Toyota · 15 vehicles |
Remanufactured caliper. Restored for dependable hydraulic braking performance.
Cast iron construction. Provides durable strength and stable braking feel.
Rust-preventative finish. Helps resist corrosion for longer service life.
Rear Right Disc Brake Caliper for Toyota
This Nugeon TechShield 360 disc brake caliper is a remanufactured rear right replacement for select Toyota applications. Built for 2003-2009 Toyota 4Runner and 2007-2014 Toyota FJ Cruiser fitment, part number 99P01662A is specified with a mounting bracket for direct service replacement.
Nugeon TechShield 360 focuses on brake hydraulics with corrosion-resistant remanufacturing and application-specific hardware details. For buyers searching for a rear right brake caliper for Toyota 4Runner or Toyota FJ Cruiser, 99P01662A provides the key OE-style features needed for a proper hydraulic brake repair.
Key Features
- Remanufactured disc brake caliper for rear right position
- Fits 2003-2009 Toyota 4Runner, rear right
- Fits 2007-2014 Toyota FJ Cruiser, rear right
- Supplied with mounting bracket
- Cast iron housing with rust preventative finish
- Grey caliper color
- Single 45 mm steel piston
- Bleeder screw included with M10-1.0 thread
- Banjo bolt inlet fitting with M10-1.0 inlet thread
- Caliper slides, dust boots, and caliper/pad hardware included
Product Details
Part number 99P01662A is a rear right disc brake caliper engineered for Toyota 4Runner and Toyota FJ Cruiser rear brake service. It uses a cast iron housing, steel piston, and a rust preventative finish to support long-term brake system durability. The TechShield 360 line identifies Nugeon’s brake hydraulics offering for remanufactured calipers with application-specific fitment and hardware details.
This caliper includes the bracket, slides, dust boots, bleeder screw, and caliper/pad hardware. It uses a banjo bolt inlet connection and M10-1.0 inlet and bleeder thread sizing. The housing cast numbers are F13 and R. Pads are not included.
Common Repair Uses
- Restores rear brake hydraulic function after caliper seizure or sticking
- Addresses uneven rear braking on Toyota 4Runner and Toyota FJ Cruiser
- Replaces a leaking or corroded rear right caliper assembly
- Corrects brake drag caused by worn piston seals or slide components
- Supports brake pedal feel recovery after hydraulic caliper failure
Installation Notes
Verify rear right fitment against the vehicle’s brake configuration before installation. Transfer or connect the banjo bolt and copper crush washers where applicable, and bleed the brake system after installation to remove air from the hydraulic circuit. Inspect brake hoses, pads, and rotor condition during caliper replacement to confirm the repair is complete.
For search relevance, this part number 99P01662A is a direct-fit rear right brake caliper for Toyota 4Runner and Toyota FJ Cruiser applications listed above.
Quality Assurance
Nugeon TechShield 360 remanufactured brake hydraulics are built around application-specific fitment and corrosion-resistant finishing for service replacement use. Part number 99P01662A is prepared as a remanufactured caliper assembly with the listed hardware and hydraulic connection details for the confirmed Toyota applications.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2014 | Toyota | FJ Cruiser | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2013 | Toyota | FJ Cruiser | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2012 | Toyota | FJ Cruiser | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2011 | Toyota | FJ Cruiser | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2010 | Toyota | FJ Cruiser | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2009 | Toyota | 4Runner | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2009 | Toyota | FJ Cruiser | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2008 | Toyota | 4Runner | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2008 | Toyota | FJ Cruiser | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2007 | Toyota | 4Runner | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2007 | Toyota | FJ Cruiser | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2006 | Toyota | 4Runner | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2005 | Toyota | 4Runner | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2004 | Toyota | 4Runner | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2003 | Toyota | 4Runner | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| No rows match your filter. | ||||