/live/media/VI/VI_99P01674A_Ang.jpg)
Nugeon 99P01674A Disc Brake Caliper - Rear Right
| Brand | Nugeon 99P01674A |
|---|---|
| Position | Rear Right |
| Anti-Squeal Shims Included | No |
| Bleeder Screw Cap Included | No |
| Bleeder Screw Included | Yes |
| Bleeder Screw Thread (mm) | M7-1.0 x 32 |
| Bleeder Thread Size | M7-1.0 |
| Bracket Cast Numbers | 4107 |
| Bracket Included | Yes |
| Bracket Mounting Bolts Included | No |
| Caliper And Pad Hardware Included | Yes |
| Caliper Color | Grey |
| Caliper Finish | Rust preventative |
| Caliper Slides Included | Yes |
| Casting Material | Cast iron |
| Dust Boots Included | Yes |
| Hardware Included | Yes |
| Housing Cast Numbers | 3849 |
| Inlet Fitting Type | Banjo bolt |
| Inlet Port Thread Size (mm) | M10-1.0 x 23.4 |
| Inlet Thread Size | M10-1.0 |
| New or Remanufactured | Remanufactured |
| Package Contents | Includes brake pad installation hardware w/ banjo bolt & copper c |
| Pads Included | No |
| Piston 1 Outside Diameter (in) | 1 |
| Piston 1 Outside Diameter (mm) | 38 |
| Piston Material | Steel |
| Piston Quantity | 1 |
| Wear Sensors Included | No |
| Product line | TechShield 360 (tm) |
| Fits | Toyota · 10 vehicles |
Remanufactured caliper. Restored for dependable brake hydraulic performance.
Cast iron housing. Provides a sturdy foundation for braking force.
Hardware included. Comes with caliper and pad installation hardware.
Rear Right Brake Caliper for Toyota Highlander
This Nugeon TechShield 360 disc brake caliper is a remanufactured rear right replacement for select 2004-2007 Toyota Highlander models. Part number 99P01674A is built with a cast iron housing, grey rust-preventative finish, and included bracket for a direct-fit brake hydraulics repair.
Compatible with 2004-2007 Toyota Highlander rear right applications, this caliper includes a 38 mm steel piston, bleeder screw, dust boots, caliper slides, and brake pad installation hardware with banjo bolt and copper crush washers where applicable. The TechShield 360 line focuses on corrosion resistance and service-ready brake hardware for everyday braking performance.
Key Features
- Remanufactured disc brake caliper for the rear right position
- Part number 99P01674A for Toyota Highlander brake service
- Cast iron housing with rust-preventative grey finish
- Includes bracket, caliper slides, dust boots, and hardware
- 38 mm steel piston with bleeder screw installed
- Banjo bolt inlet fitting with M10-1.0 inlet thread size
- TechShield 360 product line for corrosion-focused brake replacement
Detailed Description
Nugeon 99P01674A is a remanufactured rear right disc brake caliper engineered for 2004-2007 Toyota Highlander models. It is supplied with the mounting bracket and uses a single 38 mm steel piston, making it a direct replacement for servicing the rear brake hydraulic assembly on the Highlander. The caliper is finished in grey with a rust-preventative coating to help protect the cast iron body in demanding undercar conditions.
This TechShield 360 caliper includes the bleeder screw, dust boots, caliper slides, and brake pad installation hardware, along with a banjo bolt and copper crush washers where applicable. Part number 99P01674A is a practical choice when replacing a leaking, sticking, or corroded rear caliper on a Toyota Highlander.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What This Caliper Helps Fix
- Brake fluid leakage at the rear right caliper
- Uneven rear brake pad wear on the Toyota Highlander
- Sticking or seized caliper piston movement
- Corrosion on the caliper body or slides
- Soft or inconsistent rear brake pedal response caused by hydraulic caliper wear
Installation Notes and Tips
Fits 2004-2007 Toyota Highlander, rear right. Verify the inlet thread size, banjo bolt connection, and bracket casting numbers before installation. Bleed the brake system after installation and inspect the brake hose, pads, and rotor condition to complete the repair correctly. Confirm the rear right position and compare the original caliper to the replacement before mounting.
Quality Assurance
Nugeon TechShield 360 brake components are remanufactured for brake hydraulic replacement service and are built with corrosion-resistant finishing and application-specific hardware details. Part number 99P01674A is specified for the listed Toyota Highlander rear right fitment.
| Year | Make | Model | Submodel | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|---|
| 2007 | Toyota | Highlander | Base | 3.3L | V6 | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2007 | Toyota | Highlander | Limited | 3.3L | V6 | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2007 | Toyota | Highlander | Sport | 3.3L | V6 | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2007 | Toyota | Highlander | Base | 2.4L | L4 | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2006 | Toyota | Highlander | Base | 3.3L | V6 | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2006 | Toyota | Highlander | Limited | 3.3L | V6 | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2006 | Toyota | Highlander | Sport | 3.3L | V6 | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2006 | Toyota | Highlander | Base | 2.4L | L4 | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2005 | Toyota | Highlander | — | — | — | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2004 | Toyota | Highlander | — | — | — | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| No rows match your filter. | |||||||