/live/media/VI/VI_99P17329B_Ang.jpg)
Nugeon 99P17329B Disc Brake Caliper - Rear Right
| Brand | Nugeon 99P17329B |
|---|---|
| Position | Rear Right |
| Anti-Squeal Shims Included | No |
| Bleeder Screw Cap Included | No |
| Bleeder Screw Included | Yes |
| Bleeder Screw Thread (mm) | M10-1.0 x 28 |
| Bleeder Thread Size | M10-1.0 |
| Bracket Included | Yes |
| Bracket Mounting Bolts Included | No |
| Caliper And Pad Hardware Included | No |
| Caliper Color | Grey |
| Caliper Finish | Rust preventative |
| Caliper Slides Included | Yes |
| Casting Material | Aluminum |
| Dust Boots Included | Yes |
| Hardware Included | Yes |
| Housing Cast Numbers | K242-025c |
| Inlet Fitting Type | Banjo bolt |
| Inlet Port Thread Size (mm) | M10-1.0 x 23.4 |
| Inlet Thread Size | M10-1.0 |
| New or Remanufactured | Remanufactured |
| Package Contents | Includes brake pad installation hardware w/ banjo bolt & copper c |
| Pads Included | No |
| Piston 1 Outside Diameter (in) | 2 |
| Piston 1 Outside Diameter (mm) | 45 |
| Piston Material | Phenolic |
| Piston Quantity | 1 |
| Wear Sensors Included | No |
| Product line | TechShield 360 (tm) |
| Fits | Cadillac · 14 vehicles |
Remanufactured caliper. Restored for dependable brake hydraulic performance.
Aluminum casting. Lightweight construction with a rust-preventative finish.
Hardware included. Comes with a bracket, slides, dust boots, and bleeder screw.
Rear Right Disc Brake Caliper for Cadillac CTS and STS
This Nugeon TechShield 360 disc brake caliper is a remanufactured rear right replacement for select Cadillac CTS and Cadillac STS applications. Part number 99P17329B is built with a 45 mm phenolic piston, aluminum casting, and a rust-preventative grey finish for service-ready brake hydraulics restoration.
Key Features
- Fits 2003-2007 Cadillac CTS, rear right, with mounting bracket
- Fits 2005-2011 Cadillac STS, rear right, with mounting bracket
- Remanufactured disc brake caliper from Nugeon TechShield 360
- Aluminum housing with rust-preventative finish
- 45 mm phenolic piston for rear brake operation
- Includes bleeder screw, dust boots, caliper slides, bracket, and hardware
- Banjo bolt inlet fitting with M10-1.0 inlet and bleeder threads
Product Details
The TechShield 360 line focuses on brake hydraulic components prepared for direct replacement service, and this caliper follows that approach with a remanufactured aluminum body, phenolic piston, and corrosion-resistant finish. Part number 99P17329B is specified for rear right use on Cadillac CTS and Cadillac STS models with the listed brake configurations, including standard brakes on STS and standard suspension on CTS where noted. The housing cast number is K242-025C.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Problems This Caliper Can Address
- Rear brake drag caused by a sticking caliper piston
- Uneven braking from a worn or seized rear right caliper
- Brake fluid leakage at the caliper body or bleeder area
- Corrosion-related caliper performance loss
- Noisy or inconsistent rear brake operation from hydraulic wear
Installation Notes and Tips
Verify rear right position, brake package, and suspension or brake-code notes before installation. Confirm M10-1.0 inlet and bleeder thread sizes, and use the correct banjo bolt and copper crush washers where applicable. Inspect brake hoses, pads, and rotor condition during service, and bleed the hydraulic system after installation to remove air from the circuit.
Quality Assurance
Nugeon TechShield 360 remanufactured brake components are built for direct-fit hydraulic replacement on the listed Cadillac applications. This caliper includes the bracket, bleeder screw, dust boots, slides, and hardware specified in the product data for service preparation.
| Year | Make | Model | Submodel | Position | Notes |
|---|---|---|---|---|---|
| 2011 | Cadillac | STS | — | Rear Right | Supplied w/ Mounting Bracket; Std Brakes (JL9); TechShield 360 (tm) |
| 2010 | Cadillac | STS | — | Rear Right | Supplied w/ Mounting Bracket; Std Brakes (JL9); TechShield 360 (tm) |
| 2009 | Cadillac | STS | Base | Rear Right | Supplied w/ Mounting Bracket; Std Brakes (JL9); TechShield 360 (tm) |
| 2009 | Cadillac | STS | Platinum | Rear Right | Supplied w/ Mounting Bracket; Std Brakes (JL9); TechShield 360 (tm) |
| 2008 | Cadillac | STS | Base | Rear Right | Supplied w/ Mounting Bracket; Std Brakes (JL9); TechShield 360 (tm) |
| 2008 | Cadillac | STS | Platinum | Rear Right | Supplied w/ Mounting Bracket; Std Brakes (JL9); TechShield 360 (tm) |
| 2007 | Cadillac | CTS | — | Rear Right | Supplied w/ Mounting Bracket; 1-Piston Caliper, w/ Std Suspension; TechShield 360 (tm) |
| 2007 | Cadillac | STS | Base | Rear Right | Supplied w/ Mounting Bracket; Std Brakes (JL9); TechShield 360 (tm) |
| 2006 | Cadillac | CTS | — | Rear Right | Supplied w/ Mounting Bracket; 1-Piston Caliper, w/ Std Suspension; TechShield 360 (tm) |
| 2006 | Cadillac | STS | Base | Rear Right | Supplied w/ Mounting Bracket; Std Brakes (JL9); TechShield 360 (tm) |
| 2005 | Cadillac | CTS | — | Rear Right | Supplied w/ Mounting Bracket; 1-Piston Caliper, w/ Std Suspension; TechShield 360 (tm) |
| 2005 | Cadillac | STS | — | Rear Right | Supplied w/ Mounting Bracket; Std Brakes (JL9); TechShield 360 (tm) |
| 2004 | Cadillac | CTS | — | Rear Right | Supplied w/ Mounting Bracket; 1-Piston Caliper; TechShield 360 (tm) |
| 2003 | Cadillac | CTS | — | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| No rows match your filter. | |||||