Nugeon 99P17443A Disc Brake Caliper - Front Right

Front Right Disc Brake Caliper for HD Trucks

Nugeon TechShield 360 (tm) 99P17443A is a remanufactured front right disc brake caliper for select Chevrolet Silverado 2500 HD, Silverado 3500 HD, Suburban 3500 HD, GMC Sierra 2500 HD, and Sierra 3500 HD applications. It is built with a cast iron housing, phenolic pistons, and a rust preventative finish for direct brake hydraulic service.

The TechShield 360 (tm) product line focuses on brake calipers with corrosion-resistant finishing, included dust boots, and application-specific hardware details. For buyers searching for a front right brake caliper for 2011-2019 Chevrolet Silverado 2500 HD or GMC Sierra 3500 HD, 99P17443A provides the correct bracketed configuration and OE-style fitment.

• Remanufactured disc brake caliper for front right position
• Supplied with mounting bracket
• Cast iron housing with grey rust preventative finish
• Phenolic pistons with 60 mm outside diameter
• Bleeder screw included
• Caliper slides included
• Dust boots included
• Banjo bolt inlet fitting with M10-1.5 inlet thread
• Brake pad installation hardware and copper crush washers included where applicable

This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.

99P17443A is a direct-service replacement for front brake hydraulic repair on heavy-duty GM trucks. It is built around a 2-inch phenolic piston design and uses a bracketed caliper layout with cast numbers 6006 on the bracket and housing. The caliper is supplied without pads, wear sensors, or anti-squeal shims, so it is suited for brake jobs where the caliper assembly is being replaced while retaining or separately sourcing the pad set.

Common Brake Problems This Caliper Addresses

• Sticking or seized front right caliper movement
• Uneven braking pull caused by hydraulic caliper wear
• Brake fluid seepage at the caliper body or bleeder area
• Corrosion-related caliper drag on HD truck front brakes
• Worn piston seals or damaged dust boots

Installation Notes and Fitment

Compatible With 2011-2019 Chevrolet Silverado 2500 HD, front right; 2011-2019 Chevrolet Silverado 3500 HD, front right; 2016-2019 Chevrolet Suburban 3500 HD, front right; 2011-2019 GMC Sierra 2500 HD, front right; and 2011-2019 GMC Sierra 3500 HD, front right. Verify inlet thread size, banjo bolt connection, and bracketed caliper layout before installation. Bleeder screw thread is M10-1.0 x 35, and the inlet port thread size is M10-1.5 x 23.14.

Use clean brake fluid, inspect the hose sealing surfaces, and confirm rotor and pad condition during service. Because pads are not included, match the caliper replacement with the correct pad set for the vehicle and axle configuration.

Quality Assurance

Nugeon TechShield 360 (tm) 99P17443A is remanufactured for brake hydraulic replacement and finished with rust preventative protection to support long-term service in demanding truck applications. The caliper includes the specified bracket, slides, bleeder screw, and dust boots as listed for the application.