/live/media/VI/VI_99P17719A_Ang.jpg)
Nugeon 99P17719A Disc Brake Caliper - Front Right
| Brand | Nugeon 99P17719A |
|---|---|
| Position | Front Right |
| Anti-Squeal Shims Included | No |
| Bleeder Screw Cap Included | No |
| Bleeder Screw Included | Yes |
| Bleeder Screw Thread (mm) | M10-1.0 x 33 |
| Bleeder Thread Size | M10-1.0 |
| Bracket Cast Numbers | 13716801 |
| Bracket Included | Yes |
| Bracket Mounting Bolts Included | No |
| Caliper And Pad Hardware Included | Yes |
| Caliper Color | Grey |
| Caliper Finish | Rust preventative |
| Caliper Slides Included | Yes |
| Casting Material | Cast iron |
| Dust Boots Included | Yes |
| Hardware Included | Yes |
| Housing Cast Numbers | 134248 |
| Inlet Fitting Type | Banjo bolt |
| Inlet Port Thread Size (mm) | M10-1.0 x 27.32 |
| Inlet Thread Size | M10-1.0 |
| New or Remanufactured | Remanufactured |
| Package Contents | Includes brake pad installation hardware w/ banjo bolt & copper c |
| Pads Included | No |
| Piston 1 Outside Diameter (in) | 2 |
| Piston 1 Outside Diameter (mm) | 56 |
| Piston Material | Phenolic |
| Piston Quantity | 2 |
| Wear Sensors Included | No |
| Product line | TechShield 360 (tm) |
| Fits | Dodge · 16 vehicles |
Remanufactured caliper. Restored for dependable brake hydraulic performance.
Cast iron housing. Provides a sturdy foundation for braking force.
Hardware included. Comes with caliper and pad installation hardware.
Front Right Disc Brake Caliper for Ram
Nugeon TechShield 360 (tm) part number 99P17719A is a remanufactured front right disc brake caliper built for select Dodge Ram trucks. It is configured with a cast iron bracket, phenolic pistons, and a rust preventative finish for service replacement on the front right corner.
Key Features
- Fits 2006-2008 Dodge Ram 1500, front right
- Fits 2003-2008 Dodge Ram 2500, front right
- Fits 2003-2008 Dodge Ram 3500, front right
- Remanufactured disc brake caliper with bracket included
- Grey caliper with rust preventative finish
- Cast iron housing with phenolic piston material
- Bleeder screw included; inlet fitting uses a banjo bolt
- Caliper slides, dust boots, and brake pad installation hardware included where applicable
- Brake pad installation hardware and copper crush washers included where applicable
Product Details
This Nugeon TechShield 360 (tm) brake caliper is engineered for front right brake service on Dodge Ram 1500, Ram 2500, and Ram 3500 applications listed above. Part number 99P17719A includes the mounting bracket, caliper slides, dust boots, and hardware, along with a bleeder screw and banjo bolt inlet connection. The caliper uses two 56 mm phenolic pistons and an M10-1.0 inlet thread size for the specified Ram fitments.
TechShield 360 (tm) identifies Nugeon’s remanufactured brake component line with a rust preventative finish and service-ready hardware configuration. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Common Brake Issues This Part Addresses
- Sticking or seized front right caliper
- Uneven braking or pull during stops
- Brake fluid leakage at the caliper body or bleeder area
- Corrosion on the caliper housing or bracket
- Worn caliper slides affecting brake pad movement
Installation Notes
Verify the front right position, bracket cast number 13716801, housing cast number 134248, and M10-1.0 inlet thread before installation. Use the correct banjo bolt and copper crush washers where applicable, and bleed the brake system after installation to remove air from the hydraulic circuit. Confirm pad and rotor condition before returning the vehicle to service.
Quality Assurance
Nugeon TechShield 360 (tm) remanufactured brake components are built for direct replacement service on the listed Dodge Ram applications. Part number 99P17719A is supplied with the specified caliper hardware and corrosion-resistant finish for brake hydraulic repair.
| Year | Make | Model | Body Type | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|---|
| 2008 | Dodge | Ram 1500 | Extended Crew Cab Pickup | — | — | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2008 | Dodge | Ram 2500 | — | — | — | Front Right | Supplied w/ Mounting Bracket; M10x1.0 Caliper inlet; TechShield 360 (tm) |
| 2008 | Dodge | Ram 3500 | — | — | — | Front Right | Supplied w/ Mounting Bracket; M10x1.0 Caliper inlet; TechShield 360 (tm) |
| 2007 | Dodge | Ram 1500 | Extended Crew Cab Pickup | — | — | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2007 | Dodge | Ram 2500 | — | — | — | Front Right | Supplied w/ Mounting Bracket; M10x1.0 Caliper inlet; TechShield 360 (tm) |
| 2007 | Dodge | Ram 3500 | — | — | — | Front Right | Supplied w/ Mounting Bracket; M10x1.0 Caliper inlet; TechShield 360 (tm) |
| 2006 | Dodge | Ram 1500 | Extended Crew Cab Pickup | 5.7L | V8 | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2006 | Dodge | Ram 1500 | Extended Crew Cab Pickup | 4.7L | V8 | Front Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2006 | Dodge | Ram 2500 | — | — | — | Front Right | Supplied w/ Mounting Bracket; M10x1.0 Caliper inlet; TechShield 360 (tm) |
| 2006 | Dodge | Ram 3500 | — | — | — | Front Right | Supplied w/ Mounting Bracket; M10x1.0 Caliper inlet; TechShield 360 (tm) |
| 2005 | Dodge | Ram 2500 | — | — | — | Front Right | Supplied w/ Mounting Bracket; M10x1.0 Caliper inlet; TechShield 360 (tm) |
| 2005 | Dodge | Ram 3500 | — | — | — | Front Right | Supplied w/ Mounting Bracket; M10x1.0 Caliper inlet; TechShield 360 (tm) |
| 2004 | Dodge | Ram 2500 | — | — | — | Front Right | Supplied w/ Mounting Bracket; M10x1.0 Caliper inlet; TechShield 360 (tm) |
| 2004 | Dodge | Ram 3500 | — | — | — | Front Right | Supplied w/ Mounting Bracket; M10x1.0 Caliper inlet; TechShield 360 (tm) |
| 2003 | Dodge | Ram 2500 | — | — | — | Front Right | Supplied w/ Mounting Bracket; M10x1.0 Caliper inlet; TechShield 360 (tm) |
| 2003 | Dodge | Ram 3500 | — | — | — | Front Right | Supplied w/ Mounting Bracket; M10x1.0 Caliper inlet; TechShield 360 (tm) |
| No rows match your filter. | |||||||