/live/media/VI/VI_99P17767A_Ang.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Nugeon 99P17767A Disc Brake Caliper - Rear Right
| Brand | Nugeon 99P17767A |
|---|---|
| Position | Rear Right |
| Mounting Hardware Included | Yes |
| Pads Included | No |
| Caliper Casting Material | Aluminum |
| Bleeder Screw Included | Yes |
| Caliper Slides Included | Yes |
| Piston Quantity | 1 |
| Friction Materials Standards Institute Pad Number | D1647 |
| Inlet Fitting Type | Line |
| Caliper Color | Gray |
| Piston Material | Steel |
| Anti-Squeal Shims Included | No |
| Bleeder Screw Cap Included | Yes |
| Bleeder Screw Size | M10-1.0 |
| Bleeder Screw Thread (mm) | M10-1.0 |
| Bleeder Thread Size | M10-1.0 |
| Bracket Included | Yes |
| Bracket Mounting Bolts Included | No |
| Caliper And Pad Hardware Included | Yes |
| Caliper Finish | E-coat |
| Dust Boots Included | Yes |
| Housing Cast Numbers | B3826 |
| Inlet Port Thread Size (mm) | M10-1.0 |
| Inlet Thread Size | M10-1.0 |
| Package Contents | Includes brake pad installation hardware w/ banjo bolt & copper c |
| Piston 1 Outside Diameter (in) | 1 |
| Piston 1 Outside Diameter (mm) | 38 |
| Wear Sensors Included | No |
| Product line | TechShield 360 (tm) |
| Fits | Dodge · 4 vehicles |
OE-style replacement. Includes bracket, slides, and caliper hardware for service replacement.
Corrosion-resistant finish. Gray e-coat and aluminum casting help protect the caliper housing.
Complete hydraulic setup. Single-piston design with bleeder screw and dust boots included.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Overview
This Nugeon disc brake caliper, part number 99P17767A, is built for the rear right brake position on select Dodge Dart applications. It combines an aluminum housing, an e-coat finish, and included caliper slides and bracket details for a direct service replacement.
Key Features
- Aluminum caliper casting with gray e-coat finish for corrosion resistance.
- Includes bleeder screw, dust boots, caliper slides, and caliper/pad hardware.
- Single 38 mm steel piston for hydraulic actuation.
- Bracket included for the specified application.
- Uses M10-1.0 inlet and bleeder thread sizing.
Fitment Details
Fits 2013-2016 Dodge Dart, rear right. This application note matches the supplied mounting bracket configuration and TechShield 360 designation. Part number 99P17767A is listed for the rear right position only.
What It Helps Address
- Sticking or seized caliper movement.
- Brake fluid leakage at the caliper body or bleeder area.
- Uneven rear brake response caused by worn internal components.
- Corrosion-related caliper wear on the housing or hardware interfaces.
- Brake service needs when the original caliper assembly is no longer reliable.
Installation Notes
Verify the rear right fitment, bracket configuration, and thread sizes before installation. The package contents note references brake pad installation hardware with banjo bolt and copper crush washers where applicable, so confirm the exact brake line connection on the vehicle before assembly. Use the specified pad number D1647 when matching brake pads for this caliper.
Quality Assurance
Nugeon TechShield 360 is the product line identified for this caliper. The design includes an aluminum casting, e-coat finish, dust boots, and a steel piston to support consistent brake service performance. Part number 99P17767A is built to the listed application requirements.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2016 | Dodge | Dart | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2015 | Dodge | Dart | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2014 | Dodge | Dart | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2013 | Dodge | Dart | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| No rows match your filter. | ||||