/live/media/VI/VI_99P17767B_Ang.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Nugeon 99P17767B Disc Brake Caliper - Rear Left
| Brand | Nugeon 99P17767B |
|---|---|
| Position | Rear Left |
| Mounting Hardware Included | Yes |
| Pads Included | No |
| Caliper Casting Material | Aluminum |
| Bleeder Screw Included | Yes |
| Caliper Slides Included | Yes |
| Piston Quantity | 1 |
| Friction Materials Standards Institute Pad Number | D1647 |
| Inlet Fitting Type | Line |
| Caliper Color | Gray |
| Piston Material | Steel |
| Anti-Squeal Shims Included | No |
| Bleeder Screw Cap Included | Yes |
| Bleeder Screw Size | M10-1.0 |
| Bleeder Screw Thread (mm) | M10-1.0 |
| Bleeder Thread Size | M10-1.0 |
| Bracket Included | Yes |
| Bracket Mounting Bolts Included | No |
| Caliper And Pad Hardware Included | Yes |
| Caliper Finish | E-coat |
| Dust Boots Included | Yes |
| Housing Cast Numbers | B3826 |
| Inlet Port Thread Size (mm) | M10-1.0 |
| Inlet Thread Size | M10-1.0 |
| Package Contents | Includes brake pad installation hardware w/ banjo bolt & copper c |
| Piston 1 Outside Diameter (in) | 1 |
| Piston 1 Outside Diameter (mm) | 38 |
| Wear Sensors Included | No |
| Product line | TechShield 360 (tm) |
| Fits | Dodge · 4 vehicles |
OE-style replacement. Built as a direct-fit disc brake caliper for the listed application.
Aluminum housing. Gray E-coat finish helps protect the caliper surface from corrosion.
Service-ready design. Includes bleeder screw, slides, dust boots, and caliper hardware.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Overview
This Nugeon disc brake caliper, part number 99P17767B, is built for a direct-fit brake hydraulic replacement on select applications. It fits 2013-2016 Dodge Dart, rear left, and is supplied with a mounting bracket for the listed application.
Key Features
- Aluminum caliper casting with a gray E-coat finish for corrosion resistance.
- Single 38 mm steel piston for consistent hydraulic actuation.
- Includes bleeder screw, bleeder cap, caliper slides, dust boots, and caliper-and-pad hardware.
- Bracket included for the specified fitment.
- Uses M10-1.0 inlet and bleeder thread sizing.
Product Details
TechShield 360 is Nugeon’s product line for brake hydraulic components with a focus on protected surfaces and complete service-ready construction. This caliper, part number 99P17767B, is engineered around the listed hardware and thread specifications to match the original application requirements. It fits 2013-2016 Dodge Dart, rear left, and cross-references Monroe Shocks & Struts 172286 and 182286 for the same application.
Common Replacement Issues
- Sticking or seized caliper piston.
- Brake fluid leakage at the caliper body or bleeder area.
- Uneven rear brake wear caused by caliper drag.
- Corrosion on the caliper housing or slides.
- Noise or poor pedal response from worn hydraulic components.
Installation Notes
Verify the rear left fitment and confirm the M10-1.0 inlet and bleeder thread sizes before installation. The package contents note includes brake pad installation hardware with banjo bolt and copper crush washers where applicable. Pads are not included, and the caliper is specified with a bracket for the listed application.
Quality Assurance
Nugeon identifies this caliper under the TechShield 360 line, with aluminum construction, E-coat protection, and included service hardware for the specified application.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2016 | Dodge | Dart | Rear Left | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2015 | Dodge | Dart | Rear Left | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2014 | Dodge | Dart | Rear Left | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2013 | Dodge | Dart | Rear Left | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| No rows match your filter. | ||||