/live/media/VI/VI_99P17940B_Ang.jpg)
Nugeon 99P17940B Disc Brake Caliper - Front Left or Rear Left
| Brand | Nugeon 99P17940B |
|---|---|
| Position | Front Left and Rear Left |
| Anti-Squeal Shims Included | No |
| Bleeder Screw Cap Included | No |
| Bleeder Screw Included | Yes |
| Bleeder Screw Size | 3/8-24 x 1 |
| Bleeder Screw Thread (in) | 3/8-24 |
| Bracket Included | Yes |
| Bracket Mounting Bolts Included | No |
| Caliper And Pad Hardware Included | No |
| Caliper Color | Grey |
| Caliper Finish | Rust preventative |
| Caliper Slides Included | Yes |
| Casting Material | Cast iron |
| Dust Boots Included | Yes |
| Hardware Included | Yes |
| Housing Cast Numbers | 142298, 60 |
| Inlet Fitting Type | Banjo bolt |
| Inlet Port Thread Size (in) | 3/8-24 x 1 |
| Inlet Thread Size | 3/8-24 |
| New or Remanufactured | Remanufactured |
| Package Contents | Includes brake pad installation hardware w/ banjo bolt & copper c |
| Pads Included | No |
| Piston 1 Outside Diameter (in) | 2 |
| Piston 1 Outside Diameter (mm) | 60 |
| Piston Material | Phenolic |
| Piston Quantity | 2 |
| Wear Sensors Included | No |
| Fits | — |
Remanufactured caliper. Restored for dependable brake hydraulics and consistent performance.
Cast iron housing. Provides a sturdy foundation with rust-preventative finish.
Hardware included. Comes with brake pad installation hardware, banjo bolt, and copper crush washers where applicable.
Nugeon TechShield 360 Disc Brake Caliper
The Nugeon TechShield 360 disc brake caliper, part number 99P17940B, is a remanufactured brake hydraulic component built for direct replacement applications that require a 60 mm phenolic piston and a bracketed caliper design. It is finished in grey with a rust preventative coating and includes the bleeder screw, caliper slides, dust boots, and brake pad installation hardware with banjo bolt and copper crush washers where applicable.
For buyers searching for a remanufactured disc brake caliper for brake hydraulics service, 99P17940B provides the core hardware and sealing components needed for a clean caliper replacement. The TechShield 360 line focuses on corrosion resistance and service-ready fitment details for vehicles that use a 3/8-24 inlet thread and banjo bolt connection.
Key Features
- Remanufactured disc brake caliper for brake hydraulic replacement
- TechShield 360 product line with rust preventative finish
- Grey cast iron housing with phenolic pistons
- 60 mm piston diameter with dual-piston design
- Bracket included for the specified application
- Bleeder screw included; dust boots and caliper slides included
- Banjo bolt inlet fitting with 3/8-24 thread size
- Brake pad installation hardware included where applicable
- Housing cast numbers 142298 and 60
Product Details
This Nugeon caliper is built for brake service where the original unit uses a 2-inch phenolic piston, bracketed mounting, and a 3/8-24 inlet port. The cast iron body and rust preventative finish support long-term corrosion resistance, while the included bleeder screw and dust boots help restore proper hydraulic function during caliper replacement. Part number 99P17940B is a practical choice for drivers and technicians looking for a remanufactured brake caliper that matches the original hydraulic connection style.
TechShield 360 is Nugeon’s corrosion-focused product line for brake hydraulics, emphasizing protective finishing and service-ready components for replacement calipers. If you are sourcing a brake caliper for a vehicle application that calls for this configuration, 99P17940B is built around the original mounting and piston specifications rather than a universal design.
Common Problems This Part Addresses
- Sticking or seized caliper piston
- Brake fluid leakage at the caliper
- Uneven brake pad wear from caliper drag
- Corrosion on the caliper body or hardware
- Soft or inconsistent braking caused by hydraulic caliper wear
Installation Notes
Verify the inlet thread size, banjo bolt connection, bracket style, and piston diameter before installation. Replace brake fluid as needed, bleed the hydraulic system after installation, and inspect the mating brake hose, pads, and rotor condition before returning the vehicle to service. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
Compatible With select vehicle applications that use this caliper configuration; confirm exact fitment by year, make, model, and position before ordering. Fits vehicle-specific brake systems only, not universal applications.
Quality Assurance
Nugeon remanufactured brake components are processed for replacement use in brake hydraulic systems and finished with corrosion-resistant protection under the TechShield 360 line. Part number 99P17940B is built to match the listed caliper specifications for direct-service replacement applications.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| No rows match your filter. | ||||