/live/media/VI/VI_99P17958A_Ang.jpg)
Nugeon 99P17958A Disc Brake Caliper - Rear Right
| Brand | Nugeon 99P17958A |
|---|---|
| Position | Rear Right |
| Anti-Squeal Shims Included | No |
| Bleeder Screw Cap Included | No |
| Bleeder Screw Included | Yes |
| Bleeder Screw Size | 3/8-24 x 1 |
| Bleeder Screw Thread (in) | 3/8-24 |
| Bracket Cast Numbers | 144132 |
| Bracket Included | Yes |
| Bracket Mounting Bolts Included | No |
| Caliper And Pad Hardware Included | No |
| Caliper Color | Grey |
| Caliper Finish | Rust preventative |
| Caliper Slides Included | Yes |
| Casting Material | Cast iron |
| Dust Boots Included | Yes |
| Hardware Included | Yes |
| Housing Cast Numbers | 166111 |
| Inlet Fitting Type | Banjo bolt |
| Inlet Port Thread Size (in) | 3/8-24 x 1 |
| Inlet Thread Size | 3/8-24 |
| New or Remanufactured | Remanufactured |
| Package Contents | Includes brake pad installation hardware w/ banjo bolt & copper c |
| Pads Included | No |
| Piston 1 Outside Diameter (in) | 2 |
| Piston 1 Outside Diameter (mm) | 48 |
| Piston Material | Phenolic |
| Piston Quantity | 2 |
| Wear Sensors Included | No |
| Product line | TechShield 360 (tm) |
| Fits | Ford · 10 vehicles |
Remanufactured unit. Restored for dependable brake performance with a fresh service-ready build.
Cast iron housing. Provides a rigid foundation for consistent braking response and durability.
Hardware included. Comes with brake pad installation hardware, a banjo bolt, and copper crush washers where applicable.
Rear Right Brake Caliper for Ford Super Duty
This Nugeon TechShield 360 remanufactured disc brake caliper is built for rear right applications on select Ford Super Duty trucks. Part number 99P17958A is a fitment-specific replacement for 2008-2012 Ford F-250 Super Duty and 2008-2012 Ford F-350 Super Duty single rear wheel models.
TechShield 360 is Nugeon’s product line for brake hydraulics with a rust-preventative finish and application-focused remanufacturing. This caliper uses a cast iron housing, phenolic pistons, and includes the mounting bracket, slides, dust boots, bleeder screw, and hardware listed in the product data.
Key Features
- Fits 2008-2012 Ford F-250 Super Duty, rear right
- Fits 2008-2012 Ford F-350 Super Duty, rear right, single rear wheels
- Remanufactured disc brake caliper with TechShield 360 finish
- Cast iron housing with phenolic pistons
- Bracket included for the rear right application
- Caliper slides, dust boots, and bleeder screw included
- Banjo bolt inlet fitting with 3/8-24 inlet thread
- Grey caliper with rust preventative finish
- Part number 99P17958A
Detailed Description
Nugeon 99P17958A is a rear right disc brake caliper for Ford F-250 Super Duty and Ford F-350 Super Duty trucks from 2008 through 2012. It is supplied with the mounting bracket and is configured for the rear right position, making it a direct replacement for the specified Super Duty brake hydraulic setup. The caliper uses a 2-inch (48 mm) phenolic piston design, a cast iron housing, and a banjo bolt inlet connection with 3/8-24 threading.
The TechShield 360 line focuses on corrosion-resistant brake hydraulic components with a rust preventative finish. For buyers searching for a 2008-2012 Ford F-250 Super Duty rear right brake caliper or a 2008-2012 Ford F-350 Super Duty rear right caliper, 99P17958A provides the listed bracket, slides, dust boots, bleeder screw, and hardware details needed for a proper replacement selection.
Common Problems This Part Can Address
- Rear brake drag caused by a sticking caliper piston or slide assembly
- Uneven rear braking on the Ford F-250 Super Duty or Ford F-350 Super Duty
- Brake fluid seepage at the caliper or bleeder screw area
- Corrosion-related caliper wear on the rear right brake corner
- Brake pedal feel issues tied to a worn hydraulic caliper assembly
Installation Notes and Tips
Confirm rear right fitment before ordering and match the inlet thread, banjo bolt connection, and bracket configuration to the original part. Inspect brake hoses, pads, and rotor condition during installation, and bleed the brake system after replacement to remove air from the hydraulic circuit. Verify that the vehicle is a 2008-2012 Ford F-250 Super Duty or a 2008-2012 Ford F-350 Super Duty single rear wheel application before installation.
Quality Assurance
This Nugeon brake caliper is remanufactured to the listed application details and finished with rust preventative protection as part of the TechShield 360 product line. Part number 99P17958A is built to match the specified rear right Ford Super Duty fitment and component configuration.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2012 | Ford | F-250 Super Duty | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2012 | Ford | F-350 Super Duty | Rear Right | Supplied w/ Mounting Bracket; Single Rear Wheels; TechShield 360 (tm) |
| 2011 | Ford | F-250 Super Duty | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2011 | Ford | F-350 Super Duty | Rear Right | Supplied w/ Mounting Bracket; Single Rear Wheels; TechShield 360 (tm) |
| 2010 | Ford | F-250 Super Duty | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2010 | Ford | F-350 Super Duty | Rear Right | Supplied w/ Mounting Bracket; Single Rear Wheels; TechShield 360 (tm) |
| 2009 | Ford | F-250 Super Duty | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2009 | Ford | F-350 Super Duty | Rear Right | Supplied w/ Mounting Bracket; Single Rear Wheels; TechShield 360 (tm) |
| 2008 | Ford | F-250 Super Duty | Rear Right | Supplied w/ Mounting Bracket; TechShield 360 (tm) |
| 2008 | Ford | F-350 Super Duty | Rear Right | Supplied w/ Mounting Bracket; Single Rear Wheels; TechShield 360 (tm) |
| No rows match your filter. | ||||