/live/media/VI/VI_99R02155A_Ang.jpg)
Nugeon 99R02155A Disc Brake Caliper - Rear Left
| Brand | Nugeon 99R02155A |
|---|---|
| Position | Rear Left |
| Anti-Squeal Shims Included | No |
| Bleeder Screw Cap Included | No |
| Bleeder Screw Included | Yes |
| Bleeder Screw Thread (mm) | M10-1.0 x 28 |
| Bleeder Thread Size | M10-1.0 |
| Bracket Included | Yes |
| Bracket Mounting Bolts Included | No |
| Caliper And Pad Hardware Included | No |
| Caliper Color | Red |
| Caliper Finish | Powder coat |
| Caliper Slides Included | Yes |
| Casting Material | Aluminum |
| Dust Boots Included | Yes |
| Hardware Included | Yes |
| Housing Cast Numbers | 15, 16, 8609 |
| Inlet Fitting Type | Plug |
| Inlet Port Thread Size (mm) | M12-1.0 |
| Inlet Thread Size | M12-1.0 |
| New or Remanufactured | Remanufactured |
| Package Contents | Includes brake pad installation hardware w/ banjo bolt & copper c |
| Pads Included | No |
| Piston 1 Outside Diameter (in) | 1 |
| Piston 1 Outside Diameter (mm) | 38 |
| Piston Material | Steel |
| Piston Quantity | 1 |
| Wear Sensors Included | No |
| Product line | Reman Caliper w/ Installation Hardware |
| Fits | Volkswagen · 1 vehicle |
Remanufactured design. A service replacement caliper for brake hydraulic repair.
Complete caliper assembly. Includes bracket, bleeder screw, slides, and dust boots.
Powder-coated finish. Red coating adds surface protection and a clean appearance.
Product Overview
This remanufactured disc brake caliper is built for a direct brake hydraulic replacement on the specified application. It is identified by part number 99R02155A and is finished in red powder coat for a clean, corrosion-resistant appearance.
Compatible with the 2010 Volkswagen GTI rear left application, this Nugeon caliper includes a bracket, bleeder screw, caliper slides, and dust boots. The aluminum housing and steel piston support consistent brake operation, while the M12-1.0 inlet and M10-1.0 bleeder thread sizes match the listed fitment.
Key Features
- Remanufactured disc brake caliper for brake hydraulic service
- Red powder-coated finish for added surface protection
- Aluminum caliper housing with a steel piston
- Includes bracket, bleeder screw, caliper slides, and dust boots
- M12-1.0 inlet port and M10-1.0 bleeder thread sizing
- Part number 99R02155A for accurate ordering and replacement
Detailed Description
Nugeon 99R02155A is a remanufactured disc brake caliper designed around the listed rear left application for the 2010 Volkswagen GTI. The caliper uses an aluminum casting with a steel piston and comes with a powder-coated red finish. It also includes a bleeder screw, bracket, caliper slides, and dust boots, making it a complete hydraulic caliper assembly for the specified vehicle fitment.
This part cross-references Monroe Shocks & Struts (e.g., 172286) for the same application.
What It Is Used For
- Replacing a leaking or sticking brake caliper
- Restoring proper hydraulic brake pressure at the wheel
- Addressing uneven braking caused by caliper wear
- Correcting seized slide movement or piston-related drag
- Returning brake system function after caliper corrosion or damage
Installation Notes and Tips
Verify the rear left position, inlet thread size, and bleeder thread size before installation. The listed application uses a mounting bracket, so confirm the bracket style matches the vehicle’s brake setup. Bleeding the brake system after installation is required to remove air from the hydraulic circuit.
Quality Assurance
This Nugeon remanufactured caliper is built as a replacement brake hydraulic component for the specified application. Part number 99R02155A helps ensure correct identification during ordering and service.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2010 | Volkswagen | GTI | Rear Left | Supplied w/ Mounting Bracket; Red Caliper Finish; Reman Caliper w/ Installation Hardware |
| No rows match your filter. | ||||