/live/media/PA/PA_355122932_Fro.jpg)
Pagid 355122932 Disc Brake Rotor - Rear
| Brand | Pagid 355122932 |
|---|---|
| Position | Rear |
| 108.00 | |
| Bolt Hole Quantity | 7 |
| Construction | Full Cast |
| Disc Finish | coated |
| Discard Thickness | 18.00 |
| Hat Finish | coated |
| Height | 66.00 |
| Material | gray cast iron |
| Nominal Thickness | 20.00 |
| Outside Diameter | 302.00 |
| Rust Resistant Coating | Yes |
| Solid Or Vented Type Rotor | Vented |
| Product line | Hella Pagid - High Carbon and Fully Coated |
| Fits | Land Rover · 11 vehicles |
Vented design. Helps promote consistent braking performance and heat management.
Coated finish. Adds rust resistance for a cleaner look and longer-lasting protection.
Full cast construction. Made from gray cast iron for dependable rotor strength.
Cross-references Dorman - HELP 43821, Dynamic Friction Company 600-11017 and Dynamic Friction Company 604-11017 for the same application. See all 63.
Rear Brake Rotor for Land Rover LR2
This Pagid disc brake rotor is built for the rear axle of 2008-2012 Land Rover LR2 models. It combines a gray cast iron full-cast construction with a coated disc and hat finish to support corrosion resistance and consistent braking performance.
Part number 355122932 is part of the Hella Pagid High Carbon and Fully Coated line, a product range focused on coated rotor surfaces and high-carbon rotor engineering for OE-style brake service. For shoppers searching for a rear brake rotor for 2008-2012 Land Rover LR2, this rotor matches the listed fitment and specifications.
Key Features
- Fits 2008-2012 Land Rover LR2, rear
- Pagid part number 355122932
- Gray cast iron construction
- Vented rotor design
- Coated disc finish and coated hat finish
- Rust-resistant coating
- Full cast construction
- 302.00 mm outside diameter
- 20.00 mm nominal thickness
- 18.00 mm discard thickness
- 66.00 mm height
- 7 bolt holes
Detailed Description
Designed for rear brake service on the Land Rover LR2, this rotor uses a vented layout and gray cast iron material to provide the mass and thermal capacity expected in a quality replacement brake rotor. The coated surface treatment on both the disc and hat helps reduce exposed metal corrosion, which is especially relevant for vehicles driven in wet or salted-road conditions. The 302.00 mm outside diameter, 20.00 mm nominal thickness, and 18.00 mm discard thickness should be verified against the vehicle’s brake specification before installation. Part number 355122932 is also a useful reference when searching for a rear brake rotor for Land Rover LR2 applications.
This part cross-references Dynamic Friction Company (e.g., 600-11017, 604-11017) for the same application.
Common Brake Issues It May Address
- Brake pulsation from worn or uneven rotor surfaces
- Reduced braking consistency from rotor wear beyond discard thickness
- Surface rust on exposed rotor areas
- Noise caused by rotor scoring or corrosion buildup
- Brake service needs on rear Land Rover LR2 applications
Installation Notes and Tips
Confirm rear fitment for 2008-2012 Land Rover LR2 before ordering. Check rotor diameter, thickness, height, and bolt-hole count against the existing brake setup, and inspect pads, caliper hardware, and hub condition during service. Clean the hub mounting surface thoroughly so the rotor seats flat and runs true.
Quality Assurance
Pagid and the Hella Pagid High Carbon and Fully Coated line emphasize coated rotor surfaces and OE-style brake replacement standards. Verify all dimensions and vehicle fitment details against the application before installation.
| Year | Make | Model | Submodel | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|---|
| 2012 | Land Rover | LR2 | HSE | — | — | Rear | Hella Pagid - High Carbon and Fully Coated |
| 2012 | Land Rover | LR2 | HSE Lux | — | — | Rear | Hella Pagid - High Carbon and Fully Coated |
| 2012 | Land Rover | LR2 | Base | — | — | Rear | Hella Pagid - High Carbon and Fully Coated |
| 2011 | Land Rover | LR2 | HSE | — | — | Rear | Hella Pagid - High Carbon and Fully Coated |
| 2011 | Land Rover | LR2 | HSE Lux | — | — | Rear | Hella Pagid - High Carbon and Fully Coated |
| 2011 | Land Rover | LR2 | Base | — | — | Rear | Hella Pagid - High Carbon and Fully Coated |
| 2010 | Land Rover | LR2 | HSE | — | — | Rear | Hella Pagid - High Carbon and Fully Coated |
| 2009 | Land Rover | LR2 | HSE | — | — | Rear | Hella Pagid - High Carbon and Fully Coated |
| 2008 | Land Rover | LR2 | SE | — | — | Rear | Hella Pagid - High Carbon and Fully Coated |
| 2008 | Land Rover | LR2 | HSE | — | — | Rear | Hella Pagid - High Carbon and Fully Coated |
| 2008 | Land Rover | LR2 | SE | 3.2L | L6 | Rear | Hella Pagid - High Carbon and Fully Coated |
| No rows match your filter. | |||||||