/live/media/PA/PA_355133631_Fro.jpg)
Pagid 355133631 Disc Brake Rotor - Front Right
| Brand | Pagid 355133631 |
|---|---|
| Position | Front Right |
| Material | Gray cast iron |
| Discard Thickness | 34.00 |
| Nominal Thickness | 36.00 |
| Balancing Type | Mill balancing |
| Disc Finish | Coated |
| Hat Finish | Coated |
| Construction | Full cast |
| Rust Resistant Coating | Yes |
| Inside Diameter | 98.00 |
| Overall Height | 68.60 |
| Outside Diameter | 360.00 |
| Mounting Bolt Hole Quantity | 5 |
| Grade Type | Standard replacement |
| ABS Tone Ring Included | No |
| Surface Type | Slotted |
| Solid Or Vented Type Rotor | Vented |
| Bearings Included | No |
| Center Hole Diameter | 130.00 |
| Mounting Bolt Hole Circle Diameter | 130.00 |
| Stud/Lug Hole Quantity | 5 |
| Directional or Non-Directional Brake Surface | Directional |
| Assy/Disassy by Qualified Personnel Required! | . |
| Bolt Hole Circle Ø [in] | 5.12 |
| Bolt Hole Circle Ø [mm] | 130 |
| Brake Disc Thickness [in] | 1.42 |
| Brake Disc Thickness [mm] | 36 |
| Brake Disc Type | Internally vented |
| Brake Disc Type | Slotted / internally vented |
| Centering Diameter [in] | 3.86 |
| Centering Diameter [mm] | 98 |
| Product line | Integral One-Piece Design |
| Fits | Porsche · 7 vehicles |
Standard replacement. OE-level fit and performance in a vented, slotted brake rotor.
Coated finish. Helps resist rust and keeps the rotor looking cleaner longer.
Gray cast iron. Full-cast construction with high-carbon machining for dependable braking.
Cross-references Dynamic Friction Company 610-02085D, Dynamic Friction Company 614-02085D and Dynamic Friction Company 910-02085D for the same application. See all 27.
Pagid Front Right Brake Rotor for Panamera
This Pagid brake rotor, part number 355133631, is a direct-fit front right replacement for the 2010-2016 Porsche Panamera with standard brakes. It combines a slotted, internally vented design with a coated gray cast iron construction for consistent braking performance and corrosion resistance.
Built under Pagid’s Integral One-Piece Design line, this rotor is engineered as a full cast, standard replacement disc with OEM-level fit and finish. The coated disc and hat surfaces help protect against rust, while the directional braking surface and high-carbon machining support stable operation under repeated heat cycles.
Key Features
- Fits 2010-2016 Porsche Panamera, front right
- Part number 355133631
- Gray cast iron construction with full cast design
- Slotted, internally vented rotor for heat management
- Coated disc and hat surfaces for rust resistance
- 36 mm nominal thickness; 34 mm minimum thickness
- 360 mm outside diameter and 68.6 mm overall height
- 5-bolt mounting pattern with 130 mm bolt circle
- Directional brake surface for the specified application
Product Details
Pagid 355133631 is a vented front brake disc made for the Porsche Panamera front right position, excluding ceramic composite brake systems. The rotor uses gray cast iron with high-carbon machining and mill balancing to support smooth braking feel and consistent rotor behavior. Its coated finish and rust-resistant coating help preserve the disc and hat surfaces during everyday use and seasonal exposure.
The Integral One-Piece Design line focuses on brake discs built for safety, comfort, and long service life. This rotor follows that approach with an OEM-style replacement format, no wheel hub, no wheel studs, and no bearings included. It also cross-references P2025VR for the same application.
Common Problems This Rotor Can Address
- Brake pulsation from rotor wear or thickness variation
- Reduced braking consistency from heat buildup
- Surface corrosion on the braking disc and hat
- Noise or vibration caused by worn front brake rotors
- Need for a standard replacement rotor on a Porsche Panamera front right corner
Installation Notes
Fits 2010-2016 Porsche Panamera, front right, with standard braking systems and without ceramic composite brakes. Verify rotor dimensions, bolt pattern, and brake package before installation. Because this rotor is directional and internally vented, it must be installed in the correct orientation for the front right position.
Assy/disassy by qualified personnel required. Clean the hub mounting surface before installation and confirm the rotor seats fully against the hub face. Always check minimum thickness specifications during service intervals.
Quality Assurance
Pagid brake discs are manufactured to support OEM-level quality expectations and are ECE R90 certified. The coated finish, gray cast iron construction, and high-carbon machining are selected to support dependable braking performance and long-term durability in daily driving conditions.
| Year | Make | Model | Submodel | Position | Notes |
|---|---|---|---|---|---|
| 2016 | Porsche | Panamera | S E-Hybrid | Front Right | Exc.Ceramic Composite Brakes; Integral One-Piece Design |
| 2015 | Porsche | Panamera | S E-Hybrid | Front Right | Exc.Ceramic Composite Brakes; Integral One-Piece Design |
| 2014 | Porsche | Panamera | S E-Hybrid | Front Right | Exc.Ceramic Composite Brakes; Integral One-Piece Design |
| 2013 | Porsche | Panamera | S Hybrid | Front Right | Exc.Ceramic Composite Brakes; Integral One-Piece Design |
| 2012 | Porsche | Panamera | S Hybrid | Front Right | Exc.Ceramic Composite Brakes; Integral One-Piece Design |
| 2011 | Porsche | Panamera | S | Front Right | Exc.Ceramic Composite Brakes; Integral One-Piece Design |
| 2010 | Porsche | Panamera | S | Front Right | Exc.Ceramic Composite Brakes; Integral One-Piece Design |
| No rows match your filter. | |||||