/live/media/PC/PC_TAT5332_Generic.jpg)
OE Quality
60-Day Returns
Pioneer Cables TAT-5332 Clutch Alignment Tool
Pioneer Cables TAT-5332 Clutch Alignment Tool
Pioneer Cables TAT-5332 is a clutch alignment tool for manual transmission service on select Saab applications. It is built around a 23-spline profile with a 0.5-inch input shaft diameter to help center the clutch disc during installation.
Key Features
- 23-spline clutch alignment tool for accurate disc centering
- 0.5-inch input shaft diameter for the specified application
- Supports clutch service on Saab 9000 and Saab 900 models
- Direct-fit service tool for manual transmission clutch alignment
- Part number TAT-5332 for ordering and reference
Detailed Description
This Pioneer Cables clutch alignment tool is specified for 1987-1997 Saab 9000 and 1994-1995 Saab 900 applications. The 23-spline design and 0.5-inch input shaft diameter match the listed fitment requirements, helping align the clutch disc with the transmission input shaft during clutch replacement or reassembly. If you are servicing a Saab 9000 or Saab 900 and need a clutch alignment tool with the correct spline count, TAT-5332 provides the needed profile for the job.
This part number, TAT-5332, is a practical reference for technicians and DIY repair work focused on Saab manual transmission clutch service. It is also a useful search term when looking for a clutch alignment tool for 1987-1997 Saab 9000 or 1994-1995 Saab 900 applications.
What It Is Used For
- Centering the clutch disc during clutch installation
- Aligning the disc to the transmission input shaft before assembly
- Reducing clutch reassembly errors on Saab manual transmission service
- Addressing fitment issues tied to incorrect spline count or shaft diameter
- Supporting clutch replacement work on Saab 9000 and Saab 900 models
Installation Notes and Tips
Verify the spline count and input shaft diameter before use. Match the tool to the listed Saab application and confirm the clutch disc is seated and centered before tightening the pressure plate. For best results, compare the tool profile to the transmission input shaft specification during service. TAT-5332 should be used only on the fitments listed for this part.
Quality Assurance
Pioneer Cables identifies this tool by defined spline and shaft dimensions for the listed Saab applications. Confirm fitment against the vehicle year, make, and model before installation. This part cross-references no additional part numbers in the provided data.
| Brand | Pioneer Cables |
|---|---|
| Part Number | TAT-5332 |
| Input Shaft Diameter | 0.5 |
| Spline Quantity | 23 |
This part fits 13 vehicles. Search below:
| Year | Make | Model | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|
| 1997 | Saab | 9000 | 3.0L | V6 | N/A | 1" x 23" x 1/2" |
| 1996 | Saab | 9000 | 3.0L | V6 | N/A | 1" x 23" x 1/2" |
| 1995 | Saab | 900 | 2.5L | V6 | N/A | 1" x 23" x 1/2" |
| 1995 | Saab | 9000 | 3.0L | V6 | N/A | 1" x 23" x 1/2" |
| 1994 | Saab | 900 | 2.5L | V6 | N/A | 1" x 23" x 1/2" |
| 1994 | Saab | 9000 | 2.3L | L4 | N/A | 1" x 23" x 1/2" |
| 1993 | Saab | 9000 | 2.3L | L4 | N/A | 1" x 23" x 1/2" |
| 1992 | Saab | 9000 | 2.3L | L4 | N/A | 1" x 23" x 1/2" |
| 1991 | Saab | 9000 | 2.3L | L4 | N/A | 1" x 23" x 1/2" |
| 1990 | Saab | 9000 | 2.0L | L4 | N/A | 1" x 23" x 1/2" |
| 1989 | Saab | 9000 | 2.0L | L4 | N/A | 1" x 23" x 1/2" |
| 1988 | Saab | 9000 | 2.0L | L4 | N/A | 1" x 23" x 1/2" |
| 1987 | Saab | 9000 | 2.0L | L4 | N/A | 1" x 23" x 1/2" |
* Always verify fitment with your vehicle's VIN if unsure. Submodel & trim restrictions may apply.
This part directly replaces or is cross-referenced with the following part numbers:
Cross-reference numbers are provided for identification purposes only. Always confirm fitment before ordering.