/live/media/P8/P8_AR8742SCR_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
PowerStop AR8742SCR Disc Brake Rotor - Front
| Brand | PowerStop AR8742SCR |
|---|---|
| Position | Front |
| Discard Thickness | 0.96 |
| Discard Thickness | 24.50 |
| Nominal Thickness | 1.02 |
| Nominal Thickness | 25.90 |
| Balancing Type | Mill balanced |
| Construction | Full cast |
| Rust Resistant Coating | Yes |
| Overall Height | 2.50 |
| Overall Height | 63.50 |
| Outside Diameter | 12.01 |
| Outside Diameter | 305.00 |
| ABS Tone Ring Included | No |
| Surface Type | Smooth |
| Solid Or Vented Type Rotor | Vented |
| Mounting Bolt Hole Circle Diameter | 127.00 |
| Mounting Bolt Hole Circle Diameter | 5.00 |
| Stud/Lug Hole Quantity | 5 |
| Product line | PowerStop - Front Coated Hat and Edge Rotor |
| Fits | Jeep · 6 vehicles |
OE-style replacement. Direct bolt-on rotor built to match original equipment specifications.
Corrosion-resistant coating. Silver epoxy protects the hat, edge, and vanes from rust.
Vented cast design. Full cast construction with a smooth surface and mill-balanced finish.
Cross-references 5209 8672 for the same application. See all 1.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Overview
The PowerStop AR8742SCR is a coated front disc brake rotor built as a direct bolt-on replacement for original equipment. It is made for drivers who want OE-style fitment, corrosion protection, and a clean appearance behind alloy wheels.
Key Features
- Partially coated rotor with silver epoxy on corrosion-prone areas
- Coated hat, outer edge, and vanes help resist rust
- Full cast, vented construction with a smooth surface
- Mill balanced for consistent operation
- Matches original equipment weight and vane count for fitment accuracy
Detailed Description
PowerStop designed this rotor to match original equipment performance and specifications while adding a corrosion-resistant coating where it matters most. The coated hat and edge help preserve the rotor’s appearance, especially on vehicles with exposed alloy wheels, while the vented full cast design supports stable braking performance. This AR8742SCR rotor is a fit for 1999-2004 Jeep Grand Cherokee front brake applications and is built to install as a direct replacement without changing the factory setup. The AR8742SCR part number is also referenced by interchange number 5209 8672 for the same application.
Common Uses
- Replacing a worn or below-spec front brake rotor
- Addressing rust on the hat, edge, or internal vanes
- Restoring smooth braking feel after rotor wear
- Maintaining a cleaner look behind alloy wheels
- Returning the brake system to OE-style dimensions and balance
Installation Notes
Compatible With 1999-2004 Jeep Grand Cherokee, front. Verify rotor diameter, thickness, bolt circle, and hub dimensions before installation. The vented, five-lug design should be matched to the factory brake configuration for proper fit. Use standard brake service practices and inspect pads, calipers, and hardware condition during replacement.
Quality Assurance
PowerStop builds this rotor to original equipment specifications, including weight and vane count, for accurate fitment and dependable replacement performance.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2004 | Jeep | Grand Cherokee | Front | PowerStop - Front Coated Hat and Edge Rotor |
| 2003 | Jeep | Grand Cherokee | Front | PowerStop - Front Coated Hat and Edge Rotor |
| 2002 | Jeep | Grand Cherokee | Front | PowerStop - Front Coated Hat and Edge Rotor |
| 2001 | Jeep | Grand Cherokee | Front | PowerStop - Front Coated Hat and Edge Rotor |
| 2000 | Jeep | Grand Cherokee | Front | PowerStop - Front Coated Hat and Edge Rotor |
| 1999 | Jeep | Grand Cherokee | Front | PowerStop - Front Coated Hat and Edge Rotor |
| No rows match your filter. | ||||