/live/media/P8/P8_AR8793SCR_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
PowerStop AR8793SCR Disc Brake Rotor - Rear
| Brand | PowerStop AR8793SCR |
|---|---|
| Position | Rear |
| Discard Thickness | 0.49 |
| Discard Thickness | 12.50 |
| Nominal Thickness | 0.55 |
| Nominal Thickness | 14.00 |
| Balancing Type | Mill balanced |
| Construction | Full cast |
| Rust Resistant Coating | Yes |
| Overall Height | 2.61 |
| Overall Height | 66.20 |
| Outside Diameter | 12.60 |
| Outside Diameter | 320.00 |
| ABS Tone Ring Included | No |
| Surface Type | Smooth |
| Solid Or Vented Type Rotor | Solid |
| Mounting Bolt Hole Circle Diameter | 127.00 |
| Mounting Bolt Hole Circle Diameter | 5.00 |
| Stud/Lug Hole Quantity | 5 |
| Product line | PowerStop - Rear Coated Hat and Edge Rotor |
| Fits | Jeep · 11 vehicles |
Direct replacement. Bolt-on brake rotor built to match original equipment specifications.
Corrosion resistant coating. Silver epoxy protects the hat, outer edge, and vanes from rust.
Smooth, balanced design. Full cast construction with a mill-balanced finish for consistent braking.
Cross-references 5208 9275AB for the same application. See all 1.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Rear coated brake rotor overview
PowerStop AR8793SCR is a rear disc brake rotor built as a direct bolt-on replacement for original equipment. It uses a silver epoxy coating on corrosion-prone areas to help preserve appearance behind alloy wheels while matching OE performance and specifications.
Key features
- Part number AR8793SCR
- Part of the PowerStop coated hat and edge rotor line
- Silver epoxy coating on the hat, outer edge, and vanes for corrosion resistance
- Full cast, solid rotor with smooth surface finish
- Mill balanced for consistent operation
- Matches OE weight and vane count for fitment consistency
Detailed fitment and design
This rotor is engineered for rear brake service on the Jeep Commander and Jeep Grand Cherokee. Fits 2006-2010 Jeep Commander, rear, and fits 2005-2010 Jeep Grand Cherokee, rear. The 12.60-inch outside diameter, 5-lug 127 mm bolt circle, and solid rotor construction align with the original equipment layout for these applications. AR8793SCR is also cross-referenced to Monroe Shocks & Struts 5208 and 9275AB for the same application.
Common replacement reasons
- Corrosion on the rotor hat or outer edge
- Brake pulsation from worn or out-of-spec rotor surfaces
- Reduced braking consistency from rotor wear
- Visible rust that affects wheel-area appearance
Installation notes and quality
Verify rotor diameter, bolt circle, and rear axle application before installation. Clean the hub mounting surface and confirm the rotor seats flat to help prevent runout issues. PowerStop designs this rotor to match original equipment performance and specifications, including weight and vane count, for guaranteed fitment.
| Year | Make | Model | Submodel | Position | Notes |
|---|---|---|---|---|---|
| 2010 | Jeep | Commander | — | Rear | PowerStop - Rear Coated Hat and Edge Rotor |
| 2010 | Jeep | Grand Cherokee | Laredo | Rear | PowerStop - Rear Coated Hat and Edge Rotor |
| 2009 | Jeep | Commander | — | Rear | PowerStop - Rear Coated Hat and Edge Rotor |
| 2009 | Jeep | Grand Cherokee | Laredo | Rear | PowerStop - Rear Coated Hat and Edge Rotor |
| 2008 | Jeep | Commander | — | Rear | PowerStop - Rear Coated Hat and Edge Rotor |
| 2008 | Jeep | Grand Cherokee | Overland | Rear | PowerStop - Rear Coated Hat and Edge Rotor |
| 2007 | Jeep | Commander | — | Rear | PowerStop - Rear Coated Hat and Edge Rotor |
| 2007 | Jeep | Grand Cherokee | Laredo | Rear | PowerStop - Rear Coated Hat and Edge Rotor |
| 2006 | Jeep | Commander | — | Rear | PowerStop - Rear Coated Hat and Edge Rotor |
| 2006 | Jeep | Grand Cherokee | Laredo | Rear | PowerStop - Rear Coated Hat and Edge Rotor |
| 2005 | Jeep | Grand Cherokee | — | Rear | PowerStop - Rear Coated Hat and Edge Rotor |
| No rows match your filter. | |||||