PowerStop EBR1235EVC Disc Brake Rotor - Rear

Power Stop Rear Genuine Geomet High Carbon Coated Rotor Overview

The Power Stop - Rear Genuine Geomet High Carbon Coated Rotor (Part Number EBR1235EVC) is engineered for reliable braking performance on select BMW models. Designed specifically for rear disc brake applications, this rotor combines durable materials and advanced coatings to maintain consistent stopping power and resist corrosion.

• Constructed from high carbon cast iron for enhanced heat dissipation and durability
• Features a rust-resistant Geomet coating to protect against corrosion
• Vented disc design improves cooling during braking
• Full cast construction ensures structural integrity and longevity
• Compatible with BMW 528i, 528i xDrive, 535d, 535d xDrive, 535i, 535i xDrive, and ActiveHybrid 5 rear brakes
• Outside diameter of 330.30 mm (13.00 inches) and overall height of 69.10 mm (2.70 inches)
• Nominal thickness of 20.20 mm (0.80 inches) with discard thickness at 18.40 mm (0.72 inches)
• Mounting bolt hole circle diameter of 120.00 mm (4.70 inches) with 5 lug holes

About the Power Stop - Rear Genuine Geomet High Carbon Coated Rotor Line

This Power Stop product line focuses on rear rotors featuring a genuine Geomet high carbon coating that enhances corrosion resistance and extends rotor life. The high carbon cast iron material improves thermal conductivity and wear resistance, making these rotors suitable for vehicles requiring consistent braking performance under varied driving conditions. The vented design further aids in heat dissipation, reducing the risk of brake fade.

Detailed Product Description

The EBR1235EVC rotor is a vented disc brake rotor designed for rear axle use on specific BMW models including the 528i and 535i series with or without xDrive, as well as the 535d and ActiveHybrid 5. Its full cast construction ensures a solid, durable rotor capable of withstanding the stresses of braking. The high carbon cast iron material provides improved heat management compared to standard rotors, which helps maintain braking efficiency and rotor integrity over time. The Geomet coating offers a protective layer against rust and corrosion, which is especially beneficial in climates prone to moisture and road salt exposure.

Common Applications and Problem Solving

• Replacement for worn or warped rear rotors on compatible BMW models
• Addresses brake noise and vibration caused by uneven rotor surfaces
• Helps reduce brake fade during extended or aggressive braking
• Prevents premature rotor corrosion and surface rust
• Restores proper rotor thickness for safe braking performance

Installation Notes and Tips

Ensure the rotor is installed on the rear axle of compatible BMW models as specified. Verify rotor thickness before installation to confirm it meets or exceeds discard thickness limits. Clean the rotor surface to remove any protective coatings or contaminants before mounting. Proper torque specifications should be followed for mounting bolts to ensure secure fitment. It is recommended to inspect brake pads and hardware during rotor replacement for optimal braking system performance.

Quality Assurance and Warranty

Power Stop rotors are manufactured to meet or exceed OEM specifications for fit, form, and function. The high carbon cast iron material and Geomet coating contribute to durability and corrosion resistance. While specific warranty details are not provided, Power Stop products typically come with a limited warranty against defects in materials and workmanship. Refer to Power Stop documentation for exact warranty terms.