/live/media/P8/P8_JBR1151SCR_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
PowerStop JBR1151SCR Disc Brake Rotor - Rear
| Brand | PowerStop JBR1151SCR |
|---|---|
| Position | Rear |
| Discard Thickness | 0.33 |
| Discard Thickness | 8.50 |
| Nominal Thickness | 0.39 |
| Nominal Thickness | 10.00 |
| Balancing Type | Mill balanced |
| Construction | Full cast |
| Rust Resistant Coating | Yes |
| Overall Height | 2.42 |
| Overall Height | 61.50 |
| Outside Diameter | 11.46 |
| Outside Diameter | 291.00 |
| ABS Tone Ring Included | No |
| Surface Type | Smooth |
| Solid Or Vented Type Rotor | Solid |
| Mounting Bolt Hole Circle Diameter | 114.30 |
| Mounting Bolt Hole Circle Diameter | 4.50 |
| Stud/Lug Hole Quantity | 5 |
| Product line | PowerStop - Rear Coated Hat and Edge Rotor |
| Fits | Lexus · 10 vehicles |
OE-style replacement. Direct bolt-on rotor built to match original equipment specifications.
Corrosion-resistant coating. Silver epoxy protects the hat, outer edge, and vanes from rust.
Smooth, balanced finish. Full cast construction with mill balancing for consistent operation.
Cross-references 42431-30280 and 42431-30300 for the same application. See all 2.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Overview
PowerStop JBR1151SCR is a rear disc brake rotor built as a direct bolt-on replacement for original equipment. It is engineered for drivers who want OE-style fitment, corrosion protection, and consistent braking performance on compatible applications.
Key Features
- Partially coated rotor with silver epoxy on corrosion-prone areas
- Coated hat, outer edge, and vanes help resist rust
- Full cast construction with a smooth surface finish
- Mill balanced for stable operation
- Matches original equipment weight and vane count for fitment accuracy
Detailed Description
This PowerStop coated hat and edge rotor is designed to replace the original rear brake rotor with OE-style dimensions and performance targets. The JBR1151SCR uses a full cast, solid rotor design with a 11.46-inch outside diameter, 4.50-inch bolt circle, and 5-lug pattern. Its rust-resistant coating is applied to the hat, outer edge, and vanes to help preserve appearance and reduce corrosion on exposed surfaces. Fits 2006-2015 Lexus IS250, rear. This part cross-references Toyota/Lexus OE numbers 42431-30280 and 42431-30300 for the same application.
Common Issues Addressed
- Corrosion on the rotor hat and outer edge
- Brake pulsation from worn or out-of-spec rotors
- Reduced braking consistency from damaged rotor surfaces
- Fitment problems caused by incorrect OE-style dimensions
Installation Notes and Quality
Install as a direct bolt-on replacement for the original rear rotor on the listed application. Verify rotor dimensions, bolt circle, and hub compatibility before installation. PowerStop designs this rotor to match original equipment specifications, including weight and vane count, for accurate fitment on the Lexus IS250. Part number JBR1151SCR identifies this coated rear rotor for ordering and verification.
| Year | Make | Model | Body Type | Position | Notes |
|---|---|---|---|---|---|
| 2015 | Lexus | IS250 | Sedan | Rear | PowerStop - Rear Coated Hat and Edge Rotor |
| 2014 | Lexus | IS250 | Sedan | Rear | PowerStop - Rear Coated Hat and Edge Rotor |
| 2013 | Lexus | IS250 | Sedan | Rear | PowerStop - Rear Coated Hat and Edge Rotor |
| 2012 | Lexus | IS250 | Sedan | Rear | PowerStop - Rear Coated Hat and Edge Rotor |
| 2011 | Lexus | IS250 | Sedan | Rear | PowerStop - Rear Coated Hat and Edge Rotor |
| 2010 | Lexus | IS250 | Sedan | Rear | PowerStop - Rear Coated Hat and Edge Rotor |
| 2009 | Lexus | IS250 | — | Rear | PowerStop - Rear Coated Hat and Edge Rotor |
| 2008 | Lexus | IS250 | — | Rear | PowerStop - Rear Coated Hat and Edge Rotor |
| 2007 | Lexus | IS250 | — | Rear | PowerStop - Rear Coated Hat and Edge Rotor |
| 2006 | Lexus | IS250 | — | Rear | PowerStop - Rear Coated Hat and Edge Rotor |
| No rows match your filter. | |||||