/live/media/P8/P8_JBR1325SCR_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
PowerStop JBR1325SCR Disc Brake Rotor - Front
| Brand | PowerStop JBR1325SCR |
|---|---|
| Position | Front |
| Discard Thickness | 0.94 |
| Discard Thickness | 24.00 |
| Nominal Thickness | 1.02 |
| Nominal Thickness | 26.00 |
| Balancing Type | Mill balanced |
| Construction | Full cast |
| Rust Resistant Coating | Yes |
| Overall Height | 1.87 |
| Overall Height | 47.40 |
| Outside Diameter | 10.83 |
| Outside Diameter | 275.00 |
| ABS Tone Ring Included | No |
| Surface Type | Smooth |
| Solid Or Vented Type Rotor | Vented |
| Mounting Bolt Hole Circle Diameter | 114.30 |
| Mounting Bolt Hole Circle Diameter | 4.50 |
| Stud/Lug Hole Quantity | 5 |
| Product line | PowerStop - Front Coated Hat and Edge Rotor |
| Fits | Hyundai · 4 vehicles |
OE-style replacement. Direct bolt-on rotor built to match original equipment specifications.
Corrosion-resistant coating. Silver epoxy protects the hat, edge, and vanes from rust.
Vented full cast design. Smooth surface and mill-balanced construction support consistent braking.
Cross-references 51712-2H000 for the same application. See all 1.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Overview
PowerStop JBR1325SCR is a coated front disc brake rotor built as a direct bolt-on replacement for the original equipment part. It is made for drivers who want OE-style fitment, corrosion protection, and a clean appearance behind alloy wheels.
Key Features
- Partially coated rotor with silver epoxy on corrosion-prone areas
- Coated hat, outer edge, and vanes help resist rust
- Vented, full cast construction with a smooth surface
- Mill balanced for consistent operation
- Matches original equipment weight and vane count for fitment accuracy
Detailed Description
This PowerStop disc brake rotor is engineered for the front brake position on the 2007-2010 Hyundai Elantra. The JBR1325SCR uses a full cast, vented design with a smooth friction surface and rust-resistant coating on exposed areas to help preserve appearance and performance. With OE-matching specifications and direct bolt-on design, it is built to install in place of the factory rotor without changing the brake system layout. This part cross-references Hyundai 51712-2H000 for the same application.
PowerStop’s coated rotor line focuses on practical corrosion protection and OE-style replacement fit. The coated hat and edge are especially useful where wheel design leaves the rotor visible, while the vented construction supports normal brake heat management. For Hyundai Elantra brake service, JBR1325SCR provides a straightforward replacement option that follows original equipment dimensions and mounting pattern.
Common Reasons for Replacement
- Rotor wear that has reached service limits
- Rust on the hat, edge, or internal vanes
- Brake pulsation caused by uneven rotor condition
- Visible corrosion behind alloy wheels
Installation Notes
Verify rotor dimensions, bolt pattern, and brake hardware condition before installation. This rotor uses a 4.50-inch bolt circle and five lug holes, so confirm the hub and brake assembly match the listed specifications. Follow standard brake service procedures and inspect pads, caliper components, and wheel bearings during replacement.
Quality Assurance
PowerStop designs this rotor to match original equipment performance and specifications, including weight and vane count, for confirmed fitment on the listed application.
| Year | Make | Model | Body Type | Position | Notes |
|---|---|---|---|---|---|
| 2010 | Hyundai | Elantra | Sedan | Front | PowerStop - Front Coated Hat and Edge Rotor |
| 2009 | Hyundai | Elantra | Sedan | Front | PowerStop - Front Coated Hat and Edge Rotor |
| 2008 | Hyundai | Elantra | — | Front | PowerStop - Front Coated Hat and Edge Rotor |
| 2007 | Hyundai | Elantra | — | Front | PowerStop - Front Coated Hat and Edge Rotor |
| No rows match your filter. | |||||