PowerStop JBR1337EVC Disc Brake Rotor - Rear

Power Stop Rear Genuine Geomet Coated Rotor Overview

The Power Stop - Rear Genuine Geomet Coated Rotor (Part Number JBR1337EVC) is engineered for reliable braking performance on select Hyundai and Kia vehicles. Designed as a solid disc brake rotor, it features a rust-resistant Geomet coating to extend rotor life and maintain consistent stopping power.

• Compatible with Hyundai Azera, Sonata, Tucson and Kia Cadenza, Optima models
• Solid disc brake rotor with 11.10 inch (283.00 mm) outside diameter
• Nominal thickness of 10.00 mm and discard thickness of 8.40 mm
• Rust resistant Geomet coating for corrosion protection
• Overall height of 54.50 mm and mounting bolt hole circle diameter of 114.30 mm
• Five stud/lug hole configuration with 4.50 mm bolt hole diameter

Power Stop - Rear Genuine Geomet Coated Rotor Product Line

This rotor is part of the Power Stop - Rear Genuine Geomet Coated Rotor line, which focuses on providing rotors with a durable Geomet coating. This coating offers enhanced resistance to rust and corrosion compared to standard rotors, helping maintain rotor integrity and braking performance over time. The solid rotor design is optimized for rear axle applications on compatible Hyundai and Kia models, ensuring consistent fitment and function.

Detailed Product Description

The JBR1337EVC rotor is a solid disc brake rotor with an outside diameter of 283.00 mm (11.10 inches) and an overall height of 54.50 mm. It has a nominal thickness of 10.00 mm and a discard thickness of 8.40 mm, indicating when the rotor should be replaced to maintain safe braking. The rotor features a 5-lug hole pattern with a mounting bolt hole circle diameter of 114.30 mm and bolt hole diameter of 4.50 mm, matching factory specifications for the rear brakes on Hyundai Azera, Sonata, Tucson and Kia Cadenza, Optima vehicles. The Geomet coating provides a rust-resistant surface that helps prevent corrosion, extending the rotor's service life and reducing maintenance needs.

Common Applications and Issues Addressed

• Replacement for worn or warped rear rotors on Hyundai Azera, Sonata, Tucson and Kia Cadenza, Optima
• Corrosion prevention to avoid rust buildup that can cause brake noise or uneven wear
• Restores proper rotor thickness for consistent braking performance and safety
• Eliminates vibration or pulsation caused by rotor surface irregularities
• Ensures proper fitment and alignment with factory mounting specifications

Installation Notes and Tips

• Verify vehicle compatibility with Hyundai Azera, Sonata, Tucson or Kia Cadenza, Optima before installation
• Inspect calipers and brake pads for wear and replace if necessary during rotor installation
• Ensure rotor thickness meets minimum discard thickness of 8.40 mm before reuse
• Clean mounting surfaces and torque lug nuts to manufacturer specifications
• Perform a test drive to confirm proper brake operation and absence of noise or vibration

Quality Assurance and Warranty

Power Stop rotors are manufactured to meet or exceed OEM specifications for fit, form, and function. The Geomet coating provides additional corrosion resistance to enhance durability. While specific warranty details are not provided here, Power Stop products typically come with a limited warranty against defects in materials and workmanship. Always consult product documentation or the manufacturer for complete warranty information.