PowerStop JBR1756EVC Disc Brake Rotor - Rear

Power Stop Rear Genuine Geomet Coated Rotor Overview

The Power Stop - Rear Genuine Geomet Coated Rotor (Part Number JBR1756EVC) is engineered for reliable braking performance on Honda Odyssey models. Designed as a solid disc brake rotor, it features a rust-resistant Geomet coating to extend rotor life and maintain consistent stopping power.

• Compatible with Honda Odyssey rear disc brake systems
• Solid rotor design with 13.00 inch (329.70 mm) outside diameter
• Rust resistant Geomet coating for corrosion protection
• Nominal thickness of 11.10 mm with a discard thickness of 9.00 mm
• Overall height of 38.90 mm and mounting bolt hole circle diameter of 120.00 mm
• Five stud/lug hole configuration for secure fitment

Product Line Details: Power Stop - Rear Genuine Geomet Coated Rotor

This rotor is part of the Power Stop - Rear Genuine Geomet Coated Rotor line, which focuses on providing OEM-quality replacement rotors with enhanced corrosion resistance. The Geomet coating applied to these rotors helps prevent rust buildup, ensuring longer service life and consistent braking performance, especially in environments prone to moisture and road salt exposure.

Technical Specifications and Features

The JBR1756EVC rotor is a solid disc type with a 13.00 inch (329.70 mm) outside diameter, designed specifically for the rear brakes of Honda Odyssey vehicles. It has a nominal thickness of 11.10 mm and a discard thickness of 9.00 mm, indicating when the rotor should be replaced to maintain safe braking. The overall height measures 38.90 mm, and the mounting bolt hole circle diameter is 120.00 mm, accommodating five lug holes with a diameter of 4.70 mm each. The rust-resistant Geomet coating protects the rotor surface from corrosion, which helps maintain braking efficiency over time.

Common Applications and Problem Solving

• Replacement for worn or warped rear rotors on Honda Odyssey models
• Addresses rotor corrosion and rust buildup issues
• Improves braking consistency by maintaining proper rotor thickness
• Helps reduce brake noise caused by uneven rotor surfaces
• Restores proper rotor dimensions for safe brake pad contact

Installation Notes and Tips

When installing the Power Stop JBR1756EVC rotor, ensure the rotor surface is clean and free of debris before mounting. Verify the rotor thickness is above the discard thickness of 9.00 mm to maintain safety standards. Use the correct torque specifications for the five lug bolts to secure the rotor properly. It is recommended to inspect brake pads and hardware during installation to ensure optimal braking performance.

Quality Assurance and Warranty

Power Stop rotors are manufactured to meet or exceed OEM specifications for fit, form, and function. The Geomet coating provides additional protection against rust and corrosion, contributing to the rotor's durability. While specific warranty details are not provided, Power Stop products typically come with a limited warranty against defects in materials and workmanship.