PowerStop Z47-1329 Disc Brake Pad Set - Rear

Rear Brake Pads for Fleet Duty

PowerStop Z47-1329 rear disc brake pads are built for medium-duty and last mile vehicles that run at or near full GVW on a daily basis. This rear brake pad set is engineered for consistent stopping performance, reduced downtime, and lower cost per mile on demanding routes.

Compatible With Ford E-350 Super Duty rear applications from 2008-2019 and 2021-2026, plus Ford E-150 rear and Ford E-250 rear applications from 2008-2014. The Power Stop Z47 MD and Fleet line focuses on severe-duty braking needs for work vans and fleet vehicles.

Key Features

• Semi-metallic friction formula with carbon-fiber reinforcement
• Mechanical friction attachment for high shear resistance
• Scorched friction surface for quicker initial bedding
• Pad shims included for improved fit and noise control
• Premium stainless-steel hardware included
• Performance-grade rear disc brake pad set
• Outer pad thickness: 14.7 mm; inner pad thickness: 16.4 mm

Detailed Product Overview

The PowerStop Z47-1329 is part of the Z47 MD and Fleet brake pad line, a product family focused on vehicles that spend long hours in service and carry heavy loads. The semi-metallic compound is infused with carbon fiber to strengthen the pad material and support durable braking under repeated stop-and-go use. Friction material is mechanically attached to the backing plate for added shear resistance, and the scorched surface helps the pads seat more quickly during break-in. This rear brake pad set is a direct choice for Ford E-350 Super Duty, Ford E-150, and Ford E-250 rear brake service where dependable pedal response matters.

This part cross-references Ford 8C2Z 2200-A for the same application.

Common Brake Issues It Can Address

• Reduced rear braking performance on heavily loaded vans
• Brake fade during repeated stop-and-go fleet driving
• Premature pad wear from daily severe-duty use
• Inconsistent pedal feel on high-mileage work vehicles
• Noise or fitment concerns during rear brake service

Installation Notes and Tips

Verify rear fitment by year, make, model, and position before installation. Inspect rotors, calipers, and slide hardware during service, and clean the brake assembly thoroughly before installing the new pads. Follow the vehicle manufacturer’s brake bedding procedure after installation to help establish proper pad transfer on the rotor surface.

Quality Assurance

PowerStop designs the Z47 MD and Fleet line for severe-duty fleet use, with a semi-metallic carbon-fiber compound, mechanically attached friction material, included stainless-steel hardware, and included pad shims to support reliable service life in demanding applications.