Premium Guard PG7530 Engine Oil Filter

Premium Guard PG7530 Oil Filter for Suzuki

The Premium Guard PG7530 is a spin-on engine oil filter built with enhanced cellulose media for routine oil filtration in select Suzuki applications. It is engineered with an anti-drain back valve, bypass relief valve, and a 15–25 micron rating to support consistent oil flow and filtration during normal service intervals.

Key Features

• Enhanced cellulose filter media for everyday engine oil filtration
• Spin-on filter design with 3/4"-16 UNF-2B inside thread size
• Anti-drain back valve helps retain oil in the filter after shutdown
• Bypass relief valve set at 14.5–2.9 for pressure management
• 15–25 micron rating for capturing fine contaminants
• 15 L/min flow rate and 290 burst pressure specification
• NBR gasket with 0.14 in thickness for sealing support
• Dimensions: 3.41 in height, 2.67 in outer diameter bottom

Detailed Description

Premium Guard Standard Life PG7530 is an engine oil filter for drivers who need a direct-fit spin-on filter for select Suzuki models. The Standard Life product line focuses on dependable routine maintenance coverage, and this filter uses enhanced cellulose media to balance filtration efficiency with steady oil flow. The anti-drain back valve and bypass relief valve add important protection during cold starts and pressure changes, while the NBR gasket and specified thread size support proper sealing on the engine.

This part cross-references Wix 57530 and Monroe Shocks & Struts 172286 for the same application. It fits 2007-2014 Suzuki SX4 and 2009-2013 Suzuki Grand Vitara, making it a relevant choice when searching for a Suzuki SX4 oil filter or Suzuki Grand Vitara engine oil filter by part number PG7530.

What It Helps Address

• Routine engine oil contamination from dust, soot, and wear particles
• Oil drain-back after shutdown that can delay lubrication on startup
• Pressure spikes that can occur when the filter reaches restriction limits
• Service replacement needs for Suzuki SX4 and Suzuki Grand Vitara maintenance
• Fitment searches for PG7530 oil filter applications

Installation Notes and Tips

Verify the thread size, gasket diameter, and overall filter dimensions before installation. Replace the filter during each oil service, lubricate the gasket before tightening, and follow the vehicle manufacturer’s torque procedure. Confirm the application against the vehicle’s model year: Fits 2007-2014 Suzuki SX4 and Fits 2009-2013 Suzuki Grand Vitara.

Quality Assurance

Premium Guard PG7530 is built to published specifications for media type, valve features, burst pressure, flow rate, and sealing dimensions. Use the listed fitment and dimensional data to confirm the correct oil filter for your Suzuki maintenance service.