/live/media/9R/9R_421806_Fro.jpg)
PWR 42-1806 Rack and Pinion Assembly
| Brand | PWR 42-1806 |
|---|---|
| End To End Length | 1250 |
| Gasket Or Seal Included | Yes |
| Grade Type | Regular |
| Inlet Line Fitting Diameter | 16 |
| Inlet Line Fitting Gender | Female |
| Inner Tie Rods Included | Yes |
| Mounting Brackets Included | No |
| Mounting Hardware Included | No |
| Mounting Hole Quantity | 2 |
| Outer Tie Rods Included | No |
| Outlet Line Fitting Diameter | 17 |
| Outlet Line Fitting Gender | Female |
| Steering Input Shaft Diameter | 17.3 |
| Steering Input Shaft Spline Quantity | 36 |
| Total Turns Lock To Lock | 3.4 |
| Type | Hydraulic |
| Fits | Toyota · 21 vehicles |
Direct fit. Makes installation easy with a straightforward replacement.
Hydraulic design. Delivers responsive steering performance with a traditional hydraulic setup.
Tested for function. Each unit is checked for leaks, pressure, noise, and operation.
Cross-references BBB Industries 311-0113, Cardone New 97-1618 and Cardone Reman 26-1618 for the same application. See all 4.
PWR 42-1806 Rack and Pinion Assembly
The PWR 42-1806 is a hydraulic rack and pinion assembly for select Toyota full-size trucks and SUVs. It is built as a direct-fit replacement to simplify installation and is engineered for consistent steering response in daily driving and repair applications.
Key Features
- Hydraulic rack and pinion assembly
- Direct-fit design for easier installation
- Inner tie rods included
- Gasket or seal included
- 36-spline steering input shaft
- 17.3 mm steering input shaft diameter
- 1250 mm end-to-end length
- 3.4 turns lock to lock
- Female inlet and outlet line fittings
Fitment
- Fits 2001-2007 Toyota Sequoia, N/A
- Fits 2000-2006 Toyota Tundra, N/A
Detailed Description
This PWR rack and pinion assembly is engineered for Toyota Sequoia and Toyota Tundra applications that use a hydraulic steering setup. Part number 42-1806 features a 36-spline input shaft, female inlet and outlet fittings, and included inner tie rods to match the specified steering configuration. It is a practical replacement for worn steering gear components on 2000-2006 Toyota Tundra and 2001-2007 Toyota Sequoia models. This part cross-references Cardone New 97-1618 and BBB Industries 311-0113 for the same application.
What It Helps Address
- Excessive steering play or looseness
- Fluid leakage from the steering gear
- Rough or inconsistent steering effort
- Noise from a worn hydraulic rack assembly
- Steering response issues caused by internal wear
Installation Notes and Tips
Verify spline count, shaft diameter, line fitting size, and overall length before installation. Because mounting hardware and outer tie rods are not included, transfer or source the required related components as needed for the vehicle. Always inspect the hydraulic lines, seals, and steering linkage for wear before completing the repair.
Quality Assurance
PWR states that its steering components are USA engineering approved and individually tested for leaks, pressure, noise, and function before release.
| Year | Make | Model | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|
| 2007 | Toyota | Sequoia | 4.7L | V8 | N/A | — |
| 2006 | Toyota | Sequoia | 4.7L | V8 | N/A | — |
| 2006 | Toyota | Tundra | 4.7L | V8 | N/A | — |
| 2006 | Toyota | Tundra | 4.0L | V6 | N/A | — |
| 2005 | Toyota | Sequoia | 4.7L | V8 | N/A | — |
| 2005 | Toyota | Tundra | 4.7L | V8 | N/A | — |
| 2005 | Toyota | Tundra | 4.0L | V6 | N/A | — |
| 2004 | Toyota | Sequoia | 4.7L | V8 | N/A | — |
| 2004 | Toyota | Tundra | 3.4L | V6 | N/A | — |
| 2004 | Toyota | Tundra | 4.7L | V8 | N/A | — |
| 2003 | Toyota | Sequoia | 4.7L | V8 | N/A | — |
| 2003 | Toyota | Tundra | 3.4L | V6 | N/A | — |
| 2003 | Toyota | Tundra | 4.7L | V8 | N/A | — |
| 2002 | Toyota | Sequoia | 4.7L | V8 | N/A | — |
| 2002 | Toyota | Tundra | 3.4L | V6 | N/A | — |
| 2002 | Toyota | Tundra | 4.7L | V8 | N/A | — |
| 2001 | Toyota | Sequoia | 4.7L | V8 | N/A | — |
| 2001 | Toyota | Tundra | 3.4L | V6 | N/A | — |
| 2001 | Toyota | Tundra | 4.7L | V8 | N/A | — |
| 2000 | Toyota | Tundra | 3.4L | V6 | N/A | — |
| 2000 | Toyota | Tundra | 4.7L | V8 | N/A | — |
| No rows match your filter. | ||||||