/live/media/9R/9R_422025_Fro.jpg)
PWR 42-2025 Rack and Pinion Assembly
| Brand | PWR 42-2025 |
|---|---|
| End To End Length | 1050 |
| Gasket Or Seal Included | Yes |
| Grade Type | Regular |
| Inlet Line Fitting Diameter | 16 |
| Inlet Line Fitting Gender | Female |
| Inner Tie Rods Included | Yes |
| Mounting Brackets Included | No |
| Mounting Hardware Included | No |
| Mounting Hole Quantity | 2 |
| Outer Tie Rods Included | No |
| Outlet Line Fitting Diameter | 16 |
| Outlet Line Fitting Gender | Female |
| Steering Input Shaft Diameter | 17.3 |
| Steering Input Shaft Spline Quantity | 36 |
| Total Turns Lock To Lock | 2.6 |
| Type | Hydraulic |
| Fits | Acura · 5 vehicles |
Direct fit. Makes installation easy with a straightforward replacement.
Hydraulic design. Delivers responsive steering feel with proven rack-and-pinion operation.
Leak-tested. Each unit is tested for leaks, pressure, noise, and function.
Cross-references Atlantic Automotive Engineering 3228N, Maval 93154M and Standard Ignition 2046 for the same application. See all 9.
PWR 42-2025 Rack and Pinion for Acura TSX
PWR 42-2025 is a hydraulic rack and pinion assembly built for direct-fit replacement on select Acura TSX models. It is engineered for straightforward installation and is tested for leaks, pressure, noise, and function before release.
- Hydraulic rack and pinion assembly for steering system repair
- Direct-fit design for easier installation on the correct application
- Fits 2004-2008 Acura TSX
- Inner tie rods included; outer tie rods not included
- Gasket or seal included
- USA engineering approved
- Part number 42-2025 for catalog and cross-reference use
Detailed Product Overview
This PWR rack and pinion assembly is built for the steering gear and related components category and is intended for Acura TSX rack replacement work where hydraulic steering response and OE-style fitment are required. Key specifications include a 1050 end-to-end length, 2.6 turns lock-to-lock, a 36-spline steering input shaft, and 17.3 mm input shaft diameter. The inlet and outlet line fittings are both female with 16 mm diameter connections. This part cross-references Atlantic Automotive Engineering 3228N for the same application.
What This Part Helps Address
- Steering play or looseness at the wheel
- Fluid leakage from the rack and pinion assembly
- Noise or rough steering operation
- Uneven steering response during turning
- Wear-related steering gear replacement on a 2004-2008 Acura TSX
Installation Notes and Tips
Verify hydraulic line fitting size, input shaft spline count, and overall rack length before installation. Mounting hardware and mounting brackets are not included, and outer tie rods are not included. Inner tie rods are included, so inspect related steering components, alignment settings, and hydraulic lines during replacement. Confirm the vehicle is a 2004-2008 Acura TSX before ordering.
Quality Assurance
PWR states that this rack and pinion assembly is USA engineering approved and individually tested for leaks, pressure, noise, and function to help confirm proper operation before installation. Part number 42-2025 is the reference to use when matching this steering assembly to the correct Acura TSX application.
| Year | Make | Model | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|
| 2008 | Acura | TSX | 2.4L | L4 | N/A | — |
| 2007 | Acura | TSX | 2.4L | L4 | N/A | — |
| 2006 | Acura | TSX | 2.4L | L4 | N/A | — |
| 2005 | Acura | TSX | 2.4L | L4 | N/A | — |
| 2004 | Acura | TSX | 2.4L | L4 | N/A | — |
| No rows match your filter. | ||||||