PWR 60-5193P Power Steering Pump

PWR Power Steering Pump for Mercedes-Benz ML

The PWR 60-5193P is a direct-fit power steering pump for select Mercedes-Benz ML applications. It is built with a press-on pulley and press-on shaft design, and it uses O-ring hose ports for the correct style of connection on supported vehicles.

• Direct-fit replacement power steering pump
• Pulley included; press-on pulley attachment type
• Press-on shaft type
• O-ring hose port type
• No reservoir included
• USA engineering approved
• 100% tested for leaks, pressure, noise, and function

Fitment and Application Details

Fits 2003-2005 Mercedes-Benz ML350, N/A. Fits 1998-2003 Mercedes-Benz ML320, N/A. Fits 2002-2003 Mercedes-Benz ML500, N/A. Fits 2000-2003 Mercedes-Benz ML55 AMG, N/A. Fits 1999-2001 Mercedes-Benz ML430, N/A. This part cross-references DENSO Auto Parts 5353 and Maval 96399M for the same application.

Use the PWR 60-5193P when replacing a worn or noisy Mercedes-Benz ML power steering pump, restoring hydraulic assist and proper steering response. The included pulley helps match vehicles equipped with a pressed-on pulley setup, including Mercedes-Benz ML320, ML350, and related ML platform applications listed above.

Common Issues This Pump Can Address

• Heavy or inconsistent steering effort
• Whining or groaning from the power steering system
• Fluid leaks at the pump or hose connections
• Loss of hydraulic pressure
• Poor steering assist at low speeds

Installation Notes and Tips

Confirm pulley style, shaft type, inlet diameter, outlet diameter, and hose port type before installation. This pump uses a press-on pulley and press-on shaft, so the pulley must match the vehicle’s pressed-on configuration. Inspect the belt, hoses, and fluid condition during replacement to help prevent repeat failures.

Quality Assurance

PWR states that its pumps, racks, and gears are tested for leaks, pressure, noise, and function before release. The 60-5193P is also described as USA engineering approved for consistent fit and operation.