/live/media/RS/RS_5001_Fro.jpg)
Raybestos 5001 Disc Brake Rotor - Front
| Brand | Raybestos 5001 |
|---|---|
| Position | Front |
| Center Hole Diameter | 2.782 |
| Center Hole Diameter | 70.650 |
| Conventional Or Drum-In-Hat Type Rotor | Conventional |
| Discard Thickness | 0.724 |
| Discard Thickness | 18.400 |
| Mounting Bolt Hole Circle Diameter | 4.750 |
| Mounting Bolt Hole Circle Diameter | 120.650 |
| Mounting Bolt Hole Diameter | 0.514 |
| Mounting Bolt Hole Diameter | 13.050 |
| Mounting Bolt Hole Quantity | 5 |
| Nominal Thickness | 0.790 |
| Nominal Thickness | 20.050 |
| Outside Diameter | 11.500 |
| Outside Diameter | 292.100 |
| Overall Height | 2.515 |
| Overall Height | 63.900 |
| Solid Or Vented Type Rotor | Solid |
| Stud/Lug Hole Quantity | 5 |
| Product line | Specialty - Street Performance |
| Fits | Chevrolet · 4 vehicles |
Street performance line. Built for spirited braking with Raybestos specialty engineering.
Solid rotor design. Provides consistent braking performance with a simple, durable construction.
Conventional rotor. A straightforward disc brake rotor for direct replacement applications.
Cross-references ATP 101550, Centric Parts 121.62020 and Dorman - HELP 55551 for the same application. See all 60.
Raybestos 5001 Front Brake Rotor for Corvette
The Raybestos 5001 is a front disc brake rotor for 1984-1987 Chevrolet Corvette applications. Built for the Specialty - Street Performance line, it matches the fitment and dimensions needed for a conventional front rotor service on these Corvette models.
Key Features
- Part number 5001 front disc brake rotor
- Fits 1984-1987 Chevrolet Corvette, front
- Solid rotor design for conventional brake setups
- Outside diameter: 11.500 in. (292.100 mm)
- Nominal thickness: 0.790 in. (20.050 mm)
- Discard thickness: 0.724 in. (18.400 mm)
- Overall height: 2.515 in. (63.900 mm)
- 5-lug mounting pattern with 5 mounting bolt holes
- Center hole diameter: 2.782 in. (70.650 mm)
- Bolt circle diameter: 4.750 in. (120.650 mm)
Product Details
Raybestos 5001 is a conventional, solid disc brake rotor with a 5-bolt mounting pattern and 5 stud/lug holes. Its dimensions are set for front brake service on the Chevrolet Corvette from 1984 through 1987, including the 11.500-inch outside diameter and 2.515-inch overall height needed for proper rotor placement. This part cross-references Monroe Shocks & Struts 5555 for the same application.
Common Brake Issues It Can Address
- Rotor wear that has reached discard thickness
- Brake pulsation caused by uneven rotor surfaces
- Reduced braking consistency from an out-of-spec rotor
- Noise or vibration related to worn front brake components
- Service replacement for a conventional front rotor on a Corvette brake system
Installation Notes and Tips
Verify rotor dimensions, hub fit, and bolt pattern before installation. For best results, inspect pads, caliper condition, and wheel bearing surfaces during service. Confirm the rotor meets the required discard thickness and nominal thickness specifications for your brake setup. Fits 1984-1987 Chevrolet Corvette, front.
Quality Assurance
Raybestos Specialty - Street Performance parts are built for vehicle-specific brake service applications and dimensional consistency. Confirm all measurements and fitment details against the vehicle before installation.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 1987 | Chevrolet | Corvette | Front | Specialty - Street Performance |
| 1986 | Chevrolet | Corvette | Front | Specialty - Street Performance |
| 1985 | Chevrolet | Corvette | Front | Specialty - Street Performance |
| 1984 | Chevrolet | Corvette | Front | Specialty - Street Performance |
| No rows match your filter. | ||||