/live/media/RS/RS_680822FZN_Fro.jpg)
Raybestos 680822FZN Disc Brake Rotor - Front
| Brand | Raybestos 680822FZN |
|---|---|
| Position | Front |
| Center Hole Diameter | 2.500 |
| Center Hole Diameter | 63.500 |
| Conventional Or Drum-In-Hat Type Rotor | Conventional |
| Discard Thickness | 0.827 |
| Discard Thickness | 21.000 |
| Inside Diameter | 6.567 |
| Inside Diameter | 166.800 |
| Mounting Bolt Hole Circle Diameter | 4.250 |
| Mounting Bolt Hole Circle Diameter | 107.950 |
| Mounting Bolt Hole Diameter | 4.250 |
| Mounting Bolt Hole Diameter | 107.950 |
| Mounting Bolt Hole Quantity | 4 |
| Nominal Thickness | 0.906 |
| Nominal Thickness | 23.000 |
| Outside Diameter | 10.154 |
| Outside Diameter | 257.900 |
| Overall Height | 1.732 |
| Overall Height | 44.000 |
| Solid Or Vented Type Rotor | Vented |
| Stud/Lug Hole Quantity | 4 |
| Surface Type | Smooth |
| Product line | Element3; Coated Rotor |
| Fits | Ford · 9 vehicles |
Coated rotor. Element3 finish helps resist corrosion and keep the surface looking cleaner longer.
Vented design. Promotes airflow through the rotor for more consistent braking performance.
Smooth surface. Provides even pad contact for quiet, predictable braking.
Cross-references AP Exhaust 54176, BBB Industries 42277 and Bosch 20011534 for the same application. See all 35.
Front Brake Rotor for Ford Fiesta
Raybestos Element3 Coated Rotor 680822FZN is a front disc brake rotor for 2011-2019 Ford Fiesta applications. It combines a smooth braking surface with a vented rotor design and corrosion-resistant coating for service on daily-driven compact vehicles.
Key Features
- Raybestos Element3 coated rotor for front brake service
- Fits 2011-2019 Ford Fiesta, front
- Vented, conventional disc brake rotor design
- Outside diameter: 10.154 in. / 257.900 mm
- Nominal thickness: 0.906 in. / 23.000 mm
- Discard thickness: 0.827 in. / 21.000 mm
- Center hole diameter: 2.500 in. / 63.500 mm
- 4-bolt hole pattern with 4 stud/lug holes
- Smooth surface type for consistent pad contact
Product Details
The Raybestos 680822FZN is built for front brake replacement on the Ford Fiesta and follows the dimensions needed for proper rotor fitment. The Element3 coated rotor line focuses on corrosion protection and service-ready fit, while the vented construction helps manage heat during repeated stops. This part cross-references Bosch 20011534 and DuraGo BR900926 for the same application.
Common Brake Issues It Can Address
- Brake pulsation caused by worn or uneven rotor surfaces
- Reduced braking performance from rotors below service thickness
- Corrosion on exposed rotor surfaces
- Noise from damaged or heat-affected front rotors
- Uneven pad contact on a worn smooth rotor face
Installation Notes
Verify rotor dimensions, bolt pattern, and hub fitment before installation. Clean the hub mounting surface, inspect pads and caliper hardware, and measure rotor thickness after installation to confirm it remains within service limits. For best results, replace rotors in axle pairs and follow the vehicle manufacturer’s brake bedding procedure.
Quality Assurance
Raybestos manufactures brake components for OE-style service applications, and the Element3 coated rotor line is engineered to meet the dimensional and fitment requirements listed for this part number. Part number 680822FZN is specified for front brake use on 2011-2019 Ford Fiesta models.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2019 | Ford | Fiesta | Front | Element3; Coated Rotor |
| 2018 | Ford | Fiesta | Front | Element3; Coated Rotor |
| 2017 | Ford | Fiesta | Front | Element3; Coated Rotor |
| 2016 | Ford | Fiesta | Front | Element3; Coated Rotor |
| 2015 | Ford | Fiesta | Front | Element3; Coated Rotor |
| 2014 | Ford | Fiesta | Front | Element3; Coated Rotor |
| 2013 | Ford | Fiesta | Front | Element3; Coated Rotor |
| 2012 | Ford | Fiesta | Front | Element3; Coated Rotor |
| 2011 | Ford | Fiesta | Front | Element3; Coated Rotor |
| No rows match your filter. | ||||