Raybestos 782867PER Disc Brake Rotor - Front

Raybestos Front Brake Rotor for Durango

The Raybestos Specialty - Street Performance 782867PER is a front disc brake rotor built for the 2021-2025 Dodge Durango. It uses full cast iron construction with a vented, smooth, non-directional braking surface to support consistent pedal feel and even pad contact.

With a 14.37-inch outside diameter, 1.26-inch nominal thickness, and 1.197-inch discard thickness, this rotor is sized for front brake service on Durango applications that call for Raybestos Specialty - Street Performance fitment. The 5-bolt pattern, 127 mm bolt circle, and 72 mm center hole support direct replacement use where the original rotor matches these specifications.

Key Features

• Part number 782867PER
• Raybestos Specialty - Street Performance product line
• Full cast iron construction
• Vented disc brake rotor with smooth surface
• Non-directional brake surface for even wear patterns
• Front position fitment for Dodge Durango
• 5 mounting bolt holes with 127 mm bolt circle
• Outside diameter: 365 mm (14.37 in.)

Detailed Product Overview

Raybestos 782867PER is a conventional vented rotor made for front brake applications on the Dodge Durango. The cast iron, full cast design provides the mass and thermal capacity expected in a street performance rotor, while the smooth, non-directional surface supports uniform pad bedding and service consistency. This part cross-references Centric Parts 120.67087 for the same application.

Compatible With 2021-2022 Dodge Durango, front and 2023-2025 Dodge Durango, front with DODGE Brake Code BR9. If you are searching for a front brake rotor for Dodge Durango 2021-2025 or a Raybestos 782867PER replacement rotor, this part matches the listed fitment and dimensional requirements.

Common Problems This Rotor Can Address

• Front brake pulsation caused by rotor wear or thickness variation
• Brake noise related to uneven rotor surface condition
• Reduced braking consistency from a worn or heat-cycled rotor
• Service replacement needs for a damaged or below-spec front rotor
• Fitment issues when replacing a rotor with the wrong bolt pattern or diameter

Installation Notes and Tips

Verify rotor dimensions, bolt pattern, center hole diameter, and brake code before installation. Clean the hub mounting surface thoroughly to help prevent runout-related brake pulsation. Inspect pads, calipers, and hardware condition during rotor replacement, and follow the vehicle manufacturer’s torque specifications and bedding procedure after installation.

Quality Assurance

Raybestos Specialty - Street Performance rotors are built around application-specific sizing and material specifications for direct-fit brake service. Part number 782867PER is listed for confirmed front fitment on the Dodge Durango applications shown above.