/live/media/RS/RS_9653R_Fro.jpg)
Raybestos 9653R Brake Drum - Rear
| Brand | Raybestos 9653R |
|---|---|
| Position | Rear |
| Outside Diameter | 0.416 |
| Outside Diameter | 10.550 |
| Depth | 1.750 |
| Depth | 44.450 |
| Outer Cooling Fins | No |
| Nominal Drum Diameter | 0.343 |
| Nominal Drum Diameter | 8.700 |
| Stud/Lug Hole Quantity | 5 |
| Stud/Lug Hole Diameter | 0.493 |
| Stud/Lug Hole Diameter | 12.500 |
| Product line | R-Line |
| Fits | Honda · 5 vehicles |
Brake drum. R-Line replacement for dependable braking performance.
Cooling fins omitted. Simple drum design keeps the focus on stopping power.
Cross-references Anchor 9653, Beck/Arnley 083-2698 and Brembo 14.7739.10 for the same application. See all 31.
Rear Brake Drum for Honda CR-V
Raybestos R-Line 9653R is a rear brake drum built for 1997-2001 Honda CR-V applications. It is sized for a 10.550-inch outside diameter, 1.750-inch depth, and 8.700-inch nominal drum diameter, with five lug holes and a 12.500 mm stud/lug hole diameter.
The Raybestos R-Line product line focuses on direct-fit brake service parts for everyday repair work. For this application, 9653R provides the dimensional match needed for rear drum brake service on the Honda CR-V, including 1997, 1998, 1999, 2000, and 2001 models.
Key Features
- Fits 1997-2001 Honda CR-V, rear
- Raybestos R-Line part number 9653R
- 10.550-inch outside diameter and 1.750-inch depth
- 8.700-inch nominal drum diameter
- Five lug holes with 12.500 mm stud/lug hole diameter
- No outer cooling fins
Detailed Description
Raybestos 9653R is a rear brake drum for Honda CR-V models from 1997 through 2001. The listed dimensions are important for proper drum-to-shoe contact, wheel fitment, and brake system geometry. With a 10.550-inch outside diameter and 1.750-inch depth, this drum is specified for rear drum brake service where exact sizing matters.
This part cross-references DuraGo BD35067 for the same application. If you are searching for a rear brake drum for 1997-2001 Honda CR-V, Raybestos 9653R is a direct-fit reference point for that vehicle range.
Common Repair Uses
- Replacing a worn or out-of-round rear brake drum
- Restoring rear brake shoe contact surface consistency
- Addressing brake pulsation caused by drum wear
- Correcting noise from scored or heat-affected drum surfaces
- Servicing rear drum brake components on a Honda CR-V
Installation Notes and Tips
Verify rear drum brake measurements before installation, including drum diameter, depth, and lug-hole fitment. Inspect brake shoes, wheel cylinders, and hardware condition during service so the new drum is installed on a clean, even braking surface. Confirm the drum seats properly on the hub and that wheel clearance is correct after assembly.
Quality Assurance
Raybestos is a recognized brake parts brand with the R-Line covering service replacement components for common repair applications. Part number 9653R is listed with confirmed fitment for 1997-2001 Honda CR-V rear brake service.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2001 | Honda | CR-V | Rear | R-Line |
| 2000 | Honda | CR-V | Rear | R-Line |
| 1999 | Honda | CR-V | Rear | R-Line |
| 1998 | Honda | CR-V | Rear | R-Line |
| 1997 | Honda | CR-V | Rear | R-Line |
| No rows match your filter. | ||||