/live/media/RS/RS_96751R_Ang.jpg)
Raybestos 96751R Disc Brake Rotor - Front
| Brand | Raybestos 96751R |
|---|---|
| Position | Front |
| Center Hole Diameter | 3.625 |
| Center Hole Diameter | 92.050 |
| Conventional Or Drum-In-Hat Type Rotor | Conventional |
| Discard Thickness | 0.950 |
| Discard Thickness | 24.150 |
| Mounting Bolt Hole Circle Diameter | 4.500 |
| Mounting Bolt Hole Circle Diameter | 114.300 |
| Mounting Bolt Hole Diameter | 4.500 |
| Mounting Bolt Hole Diameter | 114.300 |
| Mounting Bolt Hole Quantity | 6 |
| Nominal Thickness | 1.025 |
| Nominal Thickness | 26.050 |
| Outside Diameter | 10.240 |
| Outside Diameter | 260.100 |
| Overall Height | 1.570 |
| Overall Height | 39.900 |
| Solid Or Vented Type Rotor | Vented |
| Stud/Lug Hole Quantity | 6 |
| Product line | R-Line |
| Fits | Nissan · 7 vehicles |
Vented design. Promotes airflow for more consistent braking performance.
Conventional rotor. A straightforward disc brake replacement for everyday service.
R-Line series. Raybestos value line for dependable brake parts.
Cross-references Beck/Arnley 083-2723, Bosch 40011045 and Centric Parts 120.42067 for the same application. See all 50.
Raybestos R-Line 96751R Front Brake Rotor
The Raybestos R-Line 96751R is a vented front disc brake rotor built for the 1998-2004 Nissan Frontier, front. It is sized for direct replacement service and matches the vehicle’s conventional rotor design for straightforward brake maintenance.
Key Features
- Brand: Raybestos R-Line
- Part number: 96751R
- Front disc brake rotor for 1998-2004 Nissan Frontier, front
- Vented rotor construction for front axle brake cooling
- Conventional rotor design
- Outside diameter: 10.240 in. / 260.100 mm
- Nominal thickness: 1.025 in. / 26.050 mm
- Discard thickness: 0.950 in. / 24.150 mm
- Overall height: 1.570 in. / 39.900 mm
- Center hole diameter: 3.625 in. / 92.050 mm
- 6 mounting bolt holes and 6 stud/lug holes
- Bolt circle diameter: 4.500 in. / 114.300 mm
Product Details
Raybestos R-Line brake components are positioned for everyday repair and maintenance needs, with application-specific sizing and fitment details that matter during rotor replacement. The 96751R follows the original-style front rotor layout used on the Nissan Frontier and provides the dimensional specifications needed for proper wheel and hub alignment. This part cross-references Bosch 40011045 and DuraGo BR31259 for the same application.
Common Reasons to Replace
- Brake pulsation or steering wheel shake during stops
- Rotor wear approaching discard thickness
- Brake noise caused by uneven rotor surfaces
- Reduced braking consistency from heat-related rotor wear
- Front brake service on a 1998-2004 Nissan Frontier, front
Installation Notes
Verify rotor diameter, center hole diameter, bolt pattern, and thickness before installation. Clean the hub mounting surface, inspect pads and caliper hardware, and confirm the rotor seats flat against the hub. For best results, measure the rotor after installation and follow the vehicle manufacturer’s brake service procedures.
Quality Assurance
Raybestos R-Line parts are built around application-specific brake service requirements and dimensional accuracy for direct-fit replacement work. The 96751R is identified with confirmed interchange references and vehicle fitment data for the Nissan Frontier platform.
| Year | Make | Model | Drive Type | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|---|
| 2004 | Nissan | Frontier | RWD | 2.4L | L4 | Front | R-Line |
| 2003 | Nissan | Frontier | RWD | 2.4L | L4 | Front | R-Line |
| 2002 | Nissan | Frontier | RWD | 2.4L | L4 | Front | R-Line |
| 2001 | Nissan | Frontier | RWD | 2.4L | L4 | Front | R-Line |
| 2000 | Nissan | Frontier | RWD | 2.4L | L4 | Front | R-Line |
| 1999 | Nissan | Frontier | RWD | 2.4L | L4 | Front | R-Line |
| 1998 | Nissan | Frontier | RWD | — | — | Front | R-Line |
| No rows match your filter. | |||||||