/live/media/RS/RS_980523_Fro.jpg)
Raybestos 980523 Disc Brake Rotor - Rear
| Brand | Raybestos 980523 |
|---|---|
| Position | Rear |
| Conventional Or Drum-In-Hat Type Rotor | Drum-In-Hat |
| Discard Thickness | 0.630 |
| Discard Thickness | 16.000 |
| Mounting Bolt Hole Circle Diameter | 4.500 |
| Mounting Bolt Hole Circle Diameter | 114.300 |
| Mounting Bolt Hole Diameter | 4.500 |
| Mounting Bolt Hole Diameter | 114.300 |
| Mounting Bolt Hole Quantity | 5 |
| Nominal Thickness | 0.709 |
| Nominal Thickness | 18.000 |
| Outside Diameter | 11.883 |
| Outside Diameter | 301.850 |
| Overall Height | 2.236 |
| Overall Height | 56.800 |
| Solid Or Vented Type Rotor | Vented |
| Stud/Lug Hole Quantity | 5 |
| Product line | Specialty - Street Performance |
| Fits | Mazda · 6 vehicles |
Street performance line. Built for spirited braking with a performance-focused design.
Vented rotor design. Helps move air through the rotor for more consistent braking.
Drum-in-hat rotor. Combines rotor and parking brake drum functions in one part.
Cross-references Bosch 34010914, Centric Parts 120.45077 and Centric Parts 121.45077 for the same application. See all 33.
Rear Brake Rotor for Mazda CX-7
Raybestos Specialty - Street Performance rotor 980523 is a rear disc brake rotor built for 2007-2012 Mazda CX-7 applications. It uses a vented, drum-in-hat design with a 301.850 mm outside diameter and 5-lug mounting pattern for a direct-fit replacement focused on consistent brake service.
The Raybestos Specialty - Street Performance line is aimed at drivers who want a rotor matched to performance-oriented street use. For the Mazda CX-7 rear brake setup, this rotor provides the specified dimensions and fitment needed for service work on the rear axle.
- Part number 980523 for rear brake service on the Mazda CX-7
- Vented disc brake rotor construction
- Drum-in-hat rotor design
- Outside diameter: 11.883 in. / 301.850 mm
- Nominal thickness: 0.709 in. / 18.000 mm
- Discard thickness: 0.630 in. / 16.000 mm
- Overall height: 2.236 in. / 56.800 mm
- 5 mounting bolt holes and 5 stud/lug holes
- Mounting bolt circle diameter: 4.500 in. / 114.300 mm
This rotor cross-references Bosch 34010914 for the same application.
Fitment Details
Compatible with 2007-2012 Mazda CX-7, rear. Search terms such as rear brake rotor for 2007 Mazda CX-7, 2008-2012 Mazda CX-7 rear disc brake rotor, and Raybestos 980523 Mazda CX-7 rear rotor match this application.
Common Brake Service Issues
- Rear rotor wear that reaches discard thickness
- Brake pulsation from rotor thickness variation
- Noise caused by uneven rotor surface condition
- Reduced braking consistency during routine brake service
- Replacement needs after rear brake inspection on a Mazda CX-7
Installation Notes
Verify rotor dimensions, hub fit, and rear axle application before installation. Clean the hub mounting surface thoroughly and inspect pads, calipers, and hardware condition during brake service. Confirm the rotor is installed on the rear position for the listed Mazda CX-7 model years.
Quality Assurance
Raybestos Specialty - Street Performance parts are built around application-specific brake service requirements and published dimensional specifications. Part number 980523 is listed for confirmed rear fitment on 2007-2012 Mazda CX-7 models.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2012 | Mazda | CX-7 | Rear | Specialty - Street Performance |
| 2011 | Mazda | CX-7 | Rear | Specialty - Street Performance |
| 2010 | Mazda | CX-7 | Rear | Specialty - Street Performance |
| 2009 | Mazda | CX-7 | Rear | Specialty - Street Performance |
| 2008 | Mazda | CX-7 | Rear | Specialty - Street Performance |
| 2007 | Mazda | CX-7 | Rear | Specialty - Street Performance |
| No rows match your filter. | ||||