/live/media/RS/RS_981040FZN_Fro.jpg)
Raybestos 981040FZN Disc Brake Rotor - Front
| Brand | Raybestos 981040FZN |
|---|---|
| Position | Front |
| Discard Thickness | 0.906 |
| Discard Thickness | 23.000 |
| Nominal Thickness | 0.984 |
| Nominal Thickness | 25.000 |
| Inside Diameter | 191.200 |
| Inside Diameter | 7.528 |
| Overall Height | 1.860 |
| Overall Height | 47.250 |
| Outside Diameter | 11.811 |
| Outside Diameter | 300.000 |
| Mounting Bolt Hole Quantity | 5 |
| Surface Type | Smooth |
| Solid Or Vented Type Rotor | Vented |
| Center Hole Diameter | 2.520 |
| Center Hole Diameter | 64.000 |
| Mounting Bolt Hole Circle Diameter | 114.000 |
| Mounting Bolt Hole Circle Diameter | 4.488 |
| Mounting Bolt Hole Diameter | 114.000 |
| Mounting Bolt Hole Diameter | 4.488 |
| Stud/Lug Hole Quantity | 5 |
| Conventional Or Drum-In-Hat Type Rotor | Conventional |
| Product line | Element3; Coated Rotor |
| Fits | Honda · 5 vehicles |
Coated rotor. Helps resist corrosion for longer-lasting appearance and service life.
Vented design. Promotes airflow to help manage heat during braking.
Smooth surface. Provides consistent contact for dependable braking performance.
Cross-references Beck/Arnley 083-3007, Bosch 26011550 and Centric Parts 120.40076 for the same application. See all 30.
Raybestos Element3 Coated Rotor for Honda CR-V
The Raybestos 981040FZN is a front disc brake rotor for 2012-2016 Honda CR-V applications. It combines a vented, conventional rotor design with a smooth surface and coated finish for a direct-fit replacement focused on consistent braking performance.
Built for the front axle on the Honda CR-V, this rotor measures 300.000 mm outside diameter, 25.000 mm nominal thickness, and 23.000 mm discard thickness. The 5-lug pattern, 114.000 mm bolt circle, and 64.000 mm center hole diameter support proper fitment on the listed vehicles.
Key Features
- Raybestos Element3 coated rotor design
- Part number 981040FZN
- Front disc brake rotor for 2012-2016 Honda CR-V
- Vented, conventional rotor construction
- Smooth surface type for brake pad contact
- 300.000 mm outside diameter and 25.000 mm nominal thickness
- 5 mounting bolt holes with 114.000 mm bolt circle diameter
Element3 Rotor Line Details
Raybestos Element3 rotors are positioned as a coated rotor line for drivers who want a replacement brake rotor with corrosion-resistant surface treatment and OE-style dimensions. The 981040FZN follows the listed factory-style measurements for the Honda CR-V front brake setup, making it a straightforward choice when replacing a worn or warped rotor. This part cross-references Bosch 26011550 and Centric Parts 120.40076 for the same application.
What This Rotor Helps Address
- Brake pulsation from rotor wear or thickness variation
- Steering wheel shake during braking
- Noise caused by uneven rotor surfaces
- Reduced braking consistency from heat-related rotor wear
- Corrosion on exposed rotor surfaces
Installation Notes and Tips
Fits 2012-2016 Honda CR-V, front. Verify rotor dimensions, hub fit, and brake pad condition before installation. Clean the hub mounting surface thoroughly so the rotor seats flat, and inspect caliper hardware, pads, and wheel bearings for wear that could affect braking feel. Confirm the vehicle uses the listed 5-lug, 114.000 mm bolt circle front rotor configuration before ordering.
Quality Assurance
Raybestos manufactures brake components for replacement applications, and this 981040FZN rotor is built to the listed dimensional specifications for the confirmed Honda CR-V fitment.
| Year | Make | Model | Drive Type | Position | Notes |
|---|---|---|---|---|---|
| 2016 | Honda | CR-V | FWD | Front | Element3; Coated Rotor |
| 2015 | Honda | CR-V | FWD | Front | Element3; Coated Rotor |
| 2014 | Honda | CR-V | FWD | Front | Element3; Coated Rotor |
| 2013 | Honda | CR-V | FWD | Front | Element3; Coated Rotor |
| 2012 | Honda | CR-V | FWD | Front | Element3; Coated Rotor |
| No rows match your filter. | |||||