Raybestos BH36963 Brake Hydraulic Hose - Rear or Rear Center

Raybestos Element3 BH36963 Brake Hydraulic Hose

The Raybestos Element3 BH36963 brake hydraulic hose is a direct-fit hydraulic line for rear center applications on select Dodge B-series vans. It is built with a block-style SAE end and a female thread SAE end, with an overall length of 24.900 inches for the listed fitments.

Compatible With 1975-1980 Dodge B100, rear center; 1975-1980 Dodge B200, rear center; and 1975-1980 Dodge B300, rear center. This Raybestos brake hose is identified by part number BH36963 and is cross-referenced to Dorman - First Stop H36963 for the same application.

Element3 Product Line Details

Raybestos Element3 is the brand line used for brake components that focus on fit, function, and consistent hydraulic performance. For this application, the BH36963 hose follows the listed OE-style connection types and length to match the rear center brake routing used on the supported Dodge B100, B200, and B300 vans.

Key Features

• Brake hydraulic hose for rear center placement
• Overall length: 24.900 inches
• End 1 fitting type: Block - SAE
• End 2 fitting type: Female Thread - SAE
• No gasket or seal included
• Raybestos part number BH36963

Detailed Description

BH36963 is a Raybestos Element3 brake hydraulic hose made for rear center brake line service on 1975-1980 Dodge B100, B200, and B300 vans. The hose length and SAE fitting styles are specified to match the original hydraulic routing used in these applications, helping maintain proper brake fluid transfer between the chassis line and the rear brake circuit.

This part is a practical replacement when servicing a worn, cracked, or leaking rear brake hose on a Dodge B100, Dodge B200, or Dodge B300. The BH36963 designation is useful when searching for a rear center brake hydraulic hose for these vans, especially when comparing OE-style replacement options.

Common Repair Uses

• Replacing a leaking rear center brake hose
• Restoring brake pedal response affected by hose deterioration
• Addressing visible cracking, swelling, or corrosion at the hose ends
• Correcting brake fluid loss at the rear hydraulic line
• Servicing a damaged hose on a Dodge B100, B200, or B300

Installation Notes and Tips

Verify the rear center routing, fitting style, and overall length before installation. Inspect the mating brake lines, brackets, and connection points for corrosion or thread damage, and confirm the system is properly bled after replacement. Because no gasket or seal is included, reuse or replacement of sealing components should be confirmed during service based on the vehicle’s brake connection design.

Quality Assurance

Raybestos Element3 brake components are built around application-specific fitment and OE-style connection details. This part number, BH36963, is listed for the confirmed Dodge B100, B200, and B300 rear center applications shown above.