Raybestos BH380040 Brake Hydraulic Hose - Front Right

Raybestos BH380040 Brake Hydraulic Hose

The Raybestos Element3 BH380040 brake hydraulic hose is built for the front right position on select Dodge Dakota models. It provides the correct hydraulic connection for 1992-1996 Dodge Dakota front right brake service, with SAE female thread and banjo end fittings for application-specific fitment.

Element3 Product Line

Raybestos Element3 focuses on brake components engineered for consistent performance and dependable fit. For this application, the BH380040 hose is specified with a 17.600-inch overall length and includes a gasket or seal, helping match the original connection points used on the vehicle.

Key Features

• Fits 1992-1996 Dodge Dakota, front right
• Raybestos Element3 brake hydraulic hose
• Part number BH380040
• 17.600-inch overall hose length
• Female Thread - SAE end 1 fitting
• Banjo end 2 fitting
• Gasket or seal included

Detailed Description

Use the Raybestos BH380040 when replacing a front right brake hose on a 1992-1996 Dodge Dakota. This brake hydraulic hose is built around the listed end fittings and length to support proper routing and connection at the wheel end and brake line interface. If you are searching for a Dodge Dakota front right brake hose, Raybestos BH380040 is the direct fitment reference for this application. This part cross-references Dorman - First Stop H38890 for the same application.

Common Issues This Hose Can Address

• Cracked or weathered brake hose material
• Brake fluid seepage at the hose connection points
• Restricted hydraulic flow from an internally damaged hose
• Soft or inconsistent brake pedal feel caused by hose deterioration
• Corrosion or wear at the original front right hose assembly

Installation Notes and Tips

Confirm the vehicle is a 1992-1996 Dodge Dakota and verify front right placement before installation. Match the SAE female thread and banjo fittings to the existing brake line and caliper connection, and inspect the sealing surfaces carefully during replacement. After installation, bleed the brake system according to factory service procedures and check for leaks under pedal pressure.

Quality Assurance

Raybestos Element3 brake components are built to meet application-specific fitment requirements for brake service. The BH380040 is identified by part number BH380040 for accurate ordering and catalog matching.