Raybestos BH383445 Brake Hydraulic Hose - Front Right

Raybestos Element3 Brake Hydraulic Hose BH383445

Raybestos Element3 BH383445 is a front right brake hydraulic hose for select Toyota Prius, Prius Plug-In, and Lexus CT200h applications. It is built with a female thread SAE fitting on one end, a banjo fitting on the other, and includes a gasket or seal for the connection point.

The Element3 line focuses on brake service parts that match the needs of specific vehicle applications, and this hose follows that approach with application-specific end fittings and overall length for front right brake routing.

Key Features

• Brake hydraulic hose for the front right position
• Female thread - SAE fitting at end 1
• Banjo fitting at end 2
• Overall hose length: 29.600
• Gasket or seal included
• Raybestos Element3 part number BH383445

Detailed Description

BH383445 is a Raybestos brake hydraulic hose engineered for direct replacement use on listed front right applications. It is specified with a female thread - SAE connection on one end and a banjo fitting on the other, which helps match the original brake line interface used on these vehicles. The 29.600 overall length supports proper routing in the front right brake system, while the included gasket or seal addresses the connection point at installation. This part cross-references Centric Parts 150.44154 for the same application.

Compatible With 2010-2015 Toyota Prius, front right; 2013-2015 Toyota Prius Plug-In, front right; 2011-2013 Lexus CT200h, front right; and 2016 Lexus CT200h, front right. Raybestos BH383445 is also listed for 2012 Toyota Prius Plug-In, front right under Raybestos Element 3.

Common Replacement Reasons

• Cracked or deteriorated brake hose material
• Brake fluid seepage at the hose ends
• Restricted brake fluid flow from an aging hose
• Soft or inconsistent brake pedal feel caused by hose condition
• Need for a direct-fit front right brake hose replacement

Installation Notes and Tips

Verify the vehicle year, model, and front right position before installation. Confirm the end fittings match the original brake hose connection style: female thread - SAE on one end and banjo on the other. Inspect the mating surfaces and replace the gasket or seal as required by the application. After installation, bleed the brake system according to service procedures and check for leaks at both connections.

Quality Assurance

Raybestos Element3 brake components are built for application-specific fitment and service replacement needs. BH383445 is cataloged for the listed Toyota Prius, Prius Plug-In, and Lexus CT200h front right applications, with interchange references including Dorman - First Stop H621594 and Centric Parts 150.44154.