Raybestos BH38597 Brake Hydraulic Hose - Front Outer

Raybestos Element3 Brake Hydraulic Hose BH38597

Raybestos Element3 BH38597 is a brake hydraulic hose built for specific Hyundai and Mitsubishi front outer applications. It features a female thread SAE fitting on one end, a banjo fitting on the other, and includes a gasket or seal for the connection point.

The Element3 product line focuses on brake components that match application-specific fitment requirements. For this hose, the 9.500-inch overall length and end configurations are important for proper routing and connection on the listed vehicles.

Key Features

• Brake hydraulic hose for front outer brake applications
• Female Thread - SAE fitting on end 1
• Banjo fitting on end 2
• 9.500-inch overall hose length
• Gasket or seal included
• Raybestos Element3 part number BH38597

Detailed Description

BH38597 is a direct-fit brake hydraulic hose for select Hyundai Excel, Hyundai Scoupe, and Mitsubishi Precis models in front outer positions. It is specified with a female thread SAE connection at one end and a banjo connection at the other, making it important to match the original hose layout and fitting style during replacement. This part cross-references Dorman - First Stop H38597 for the same application.

Use BH38597 when servicing a worn, leaking, or damaged front outer brake hose on 1987-1995 Hyundai and Mitsubishi applications listed below. The Raybestos BH38597 hose supports correct hydraulic routing for vehicles such as the Hyundai Excel and Mitsubishi Precis, where hose length and end style must match the original brake system design.

Vehicle Fitment

• Fits 1991-1995 Hyundai Scoupe, Front Outer
• Fits 1988-1994 Hyundai Excel, Front Outer
• Fits 1987-1993 Mitsubishi Precis, Front Outer
• Fits 1987 Hyundai Excel, Front Outer; fits vehicles manufactured from 8/21/87

Common Replacement Reasons

• Brake fluid seepage at the hose or fitting
• Cracked, swollen, or aged rubber hose material
• Restricted brake fluid flow from internal hose deterioration
• Corrosion or damage at the banjo or threaded connection
• Incorrect hose length or fitting style after prior repair work

Installation Notes

Confirm the vehicle’s front outer brake hose routing, fitting style, and overall length before installation. Inspect the mating hard line, banjo bolt area, and sealing surfaces for wear or corrosion, and replace damaged sealing components as needed. After installation, bleed the brake system and verify there are no leaks at either connection.

Quality Assurance

Raybestos Element3 brake components are built around application-specific fitment and OE-style connection requirements. Verify the part number BH38597 against the vehicle’s original hose configuration to ensure proper brake system service.