Raybestos BH38656 Brake Hydraulic Hose - Rear Right

Raybestos Element3 BH38656 Brake Hose

The Raybestos Element3 BH38656 is a rear right brake hydraulic hose for select 1988-1992 Chevrolet Corvette applications. It is built with a female thread ISO fitting on one end and a banjo fitting on the other, with an overall length of 12.100 inches for the specified rear-right routing.

Key Features

• Brake hydraulic hose for rear right placement
• Female thread - ISO fitting at end 1
• Banjo fitting at end 2
• Overall hose length: 12.100 inches
• Gasket or seal included: yes
• Raybestos Element3 line application

Element3 Product Line

Raybestos Element3 focuses on brake components engineered for direct-fit service applications. For this Corvette brake hose, the Element3 designation identifies the product line within Raybestos brake hydraulics, helping buyers match the correct hose style, end fittings, and placement for service work on the rear right side.

Detailed Description

BH38656 is a brake hydraulic hose for the rear right position on 1988-1992 Chevrolet Corvette models. The hose uses a female thread ISO connection on one end and a banjo connection on the other, which is important when matching the original routing and attachment style during brake repair. This Raybestos BH38656 hose is also cross-referenced to Dorman - First Stop H38656 for the same application.

Compatible With 1988-1992 Chevrolet Corvette, rear right. This part number, BH38656, is the correct reference to verify against the vehicle’s brake hose layout before ordering. It is also listed under Raybestos BH38656 for catalog and service lookup purposes.

Common Problems It Can Address

• Cracked or deteriorated brake hose rubber
• Brake fluid seepage at the hose ends
• Restricted fluid flow from an aging hose
• Soft or inconsistent brake pedal feel caused by hose wear
• Corrosion or damage at the hose connection points

Installation Notes and Tips

• Confirm rear right placement before installation.
• Match the female thread ISO and banjo end fittings to the original hose.
• Inspect the sealing surfaces and replace the included gasket or seal as required by the application.
• After installation, bleed the brake system according to the vehicle service procedure.
• Check hose routing for clearance through suspension travel and steering movement.

Quality Assurance

Raybestos brake hydraulic components are cataloged for direct application matching, and BH38656 is listed with confirmed fitment for 1988-1992 Chevrolet Corvette rear right service.