Raybestos BH38711 Brake Hydraulic Hose - Front Left

Raybestos BH38711 Brake Hydraulic Hose for 1988 Honda CRX

Raybestos Element3 BH38711 is a brake hydraulic hose for the front left position on the 1988 Honda CRX. It uses a female thread SAE fitting on one end and a banjo fitting on the other, with an overall length of 26.500 inches for the specified application.

Element3 Product Line Details

Raybestos Element3 focuses on brake components built for direct-fit replacement needs. For this application, BH38711 follows the listed hose configuration and includes a gasket or seal, helping match the connection points required on the 1988 Honda CRX front left brake circuit.

Key Features

• Brake hydraulic hose for the front left position
• Fits 1988 Honda CRX, front left
• Overall hose length: 26.500 inches
• End 1 fitting: female thread - SAE
• End 2 fitting: banjo
• Gasket or seal included
• Raybestos Element3 BH38711 replacement part

Detailed Description

BH38711 is a Raybestos brake hydraulic hose engineered for the 1988 Honda CRX front left location. The hose configuration includes a female thread SAE connection at one end and a banjo fitting at the other, along with a 26.500-inch overall length to match the listed brake hose application. This part number, BH38711, is also cross-referenced to Dorman - First Stop H38711 for the same application.

Use this hose when servicing the front left brake hydraulic line on the 1988 Honda CRX. The listed fitment is specific to the MEIJI Type Brake Hydraulic Hose application noted for this vehicle.

Common Replacement Reasons

• Brake hose cracking, swelling, or visible wear
• Fluid seepage at the hose or fitting connection
• Soft or inconsistent brake pedal feel caused by hose deterioration
• Corrosion or damage at the banjo or threaded end connections
• Need for a direct replacement on the front left brake line

Installation Notes and Tips

Confirm the vehicle is a 1988 Honda CRX with the listed front left hose application before installation. Match the female thread SAE and banjo fitting ends to the original connection points, and verify hose length and routing against the removed part. Inspect the mating surfaces and replace the hose only after the brake system is properly depressurized and serviced according to factory procedures.

Quality Assurance

Raybestos Element3 brake components are built around application-specific fitment and connection details. BH38711 is listed with a gasket or seal included and is referenced for the 1988 Honda CRX front left brake hydraulic hose application.